Product identity

Product Codes

Storage Unit

TET136A	TET52	TET66
TET136AC	TET52C	TET66C
TET136ACL	TET52C_B	TET66C_B
TET136AL	TET52_B	TET66_B

Warnings

Keep for reference: read carefully.

Always remember to be careful not to use the product improperly, considering its designated functions.

When the product is no longer used, do not abandon it, but take it to a suitable public waste collection facility.

Considering the particular aesthetics of the product, during use, the doors opening must not exceed 90°.

To maintain the quality and finish of the surface, it is advisable to use protective articles (e.g. placemats or trivets) under objects that could scratched it.

This product sheet complies with the legal obligations pursuant to the "Consumer Code" Decree n. 206 dated 6/9/2005 and the "Actuation Regulation" Decree n. 101 dated 8/2/1997.

Materials

Frame
veneered MDF wood fibre panel with solid wood parts

Drawer
bottom base and back panel in wood particles with melamine faced cover, edges in aluminium with complete opening and cushioned runners

Ferrules
anodized aluminium

LED lighting system
Strip LED 24V DC 3000K
- Power supply unit: input voltage 110-240V 50-60Hz, output voltage 12-24V DC, maximum wattage 18W-48W

Maintenance

Wood - Painting

For weekly maintenance, dust the surface with a dry cloth.
For dried dirt, use a well-squeezed out cloth, damp with warm water.
For greasy or oily dirt, use a damp sponge and dish washing detergent, and then wipe with a well-squeezed out cloth damp with warm water.
Warning! Apply the detergent directly on the damp sponge, and never on directly on the furniture.
Do not exert excessive pressure and always follow the grain on wood furniture.
Note that if you press or rub too hard, surfaces can become 'polished'.
Avoid using abrasives and products containing solvents, ammonia and/or alcohol.
Make sure to dry the surfaces completely after washing.

Led

The luminaire is classified as EEE (electrical and electronic equipment) and must be disposed of in compliance with regulations.
Individual LED in the bar cannot be replaced. If one malfunctions, it is necessary to replace the entire bar.
Clean the luminaire only when disconnected from the power mains.
Clean only with a dry cloth.

Instructions

Download PDF

Warranty

B&B Italia guarantees the cover, the feet, the materials, accessories and mechanisms making up the product for 26 months from the date of manufacture (as stated on the "Product data sheet - Guarantee") against any manufacturing defect including lacquering and frame of non-upholstery products. In any case, it has to be pointed out that the materials, even if adequately lightfast to sunlight and artificial light, may be subject to alterations over time due to prolonged exposure to light, washing and ordinary mechanical wear. The guarantee refers to original product manufacturing defects and consists of replacement or repair, free of charge, of the unusable or defective parts, ascertained and acknowledged as such by B&B Italia or its representative. The guarantee does not cover anomalies and spoilage due to:

normal wear over time;
illegitimate use;
inappropriate care with treatments not complying with the enclosed instructions.

Moreover, the guarantee does not cover defects of non-compliance that cannot be attributed to B&B Italia (e.g. incorrect assembling of the product and/or assembling not complying with the assembling instructions). This provision also applies to those products that are designed to be installed directly by the consumer, in the presence of correct and exhaustive instructions. The guarantee shall be forfeited if the products are unassembled, modified or repaired by anyone who is not authorised by B&B Italia. Any intervention made in guarantee does not interrupt the course thereof. To exercise the rights deriving from this guarantee, the relevant "Product data sheet - Guarantee" shall be forwarded to B&B Italia (to the address stated below) bearing the date of manufacture; said "Product data sheet - Guarantee" shall therefore be retained for the entire period during which the guarantee is valid. B&B Italia S.p.A. 22060 Novedrate (CO) Italy, Strada Provinciale 32 n.15 For the purpose of better preserving the product over time it is recommended:

not to jump or sit on the overhanging parts, the backrests and the armrests;
not to drag the product, lifting it instead, so as to avoid damages to the parts resting on the floor;
to protect the product against shocks and contact with pointed and sharp elements and liquids or detergents containing corrosive agents;
to follow the care instructions listed in the specific section of the material enclosed with the product.

Designer

Naoto Fukasawa

Naoto Fukasawa is a designer known for his projects devoted to simplicity and sublime beauty, as well as unusual ideas. He has designed a wide range of products, from hi-tech to electronic equipment, architecture, and also high-end furniture and objects. He is collaborating with top leading brands, including B&B Italia, throughout Europe, America, and Asia. Fukasawa is one of the directors of 21_21 DESIGN SIGHT, he also sits on the design advisory board of MUJI and is the art director of MARUNI. In 2006, he established “Super Normal” with Jasper Morrison. In 2017, he became a member of the judging committee for the LOEWE Craft Prize. He is vice president at Tama Art University and director of The Nihon Mingei-kan (The Japan Folk Crafts Museum) since 2012. In 2022 he founded the Design Science Foundation. Fukasawa is the winner of numerous awards given by domestic and international institutions, including the 2018 Isamu Noguchi Award. He published a few books, the most recent one in 2018 “Naoto Fukasawa EMBODIMENT” (Phaidon).