Product identity

Warnings

Keep for reference: read carefully.

Always remember to be careful not to use the product improperly, considering its designated functions.

When the product is no longer used, do not abandon it, but take it to a suitable public waste collection facility.

In case of bad weather, take the product to a covered place protected from the weather.

Do not place the product in overly damp environments (e.g. saunas) and in direct contact with water (e.g. sea water, chlorinated water, snow).

Do not immerse in tanks and swimming pools, and do not place at the water’s edge.

Oil stains and suncare lotions must be immediately cleaned.

This product sheet complies with the legal obligations pursuant to the "Consumer Code" Decree n. 206 dated 6/9/2005 and the "Actuation Regulation" Decree n. 101 dated 8/2/1997.

Materials

Support rod
aluminium

Sunshade
100% PVC fabric

Base-frame
cement (Ultra High Performance Concrete)

Ferrules
thermoplastic material

Maintenance

Aluminium

We advise using normal commercial products for cleaning delicate surfaces and/or warm water and neutral soap.
Never use abrasives or products containing solvents, ammonia and/or alcohol.
Make sure to dry the surfaces completely after washing.

Cement

We recommend cleaning with a damp cloth and a mild detergent and water solution.
Never use alcohol, solvents or abrasive products.
Only in the presence of marks or solidified stains, we recommend cleaning with a slightly abrasive sponge dampend with a mild detergent and water solution.
In case of stains caused by liquids and/or oily substances (e.g. lemon, vinegar, coffee, oil, wine), promptly pat and remove the dirt with an absorbent cloth to prevent it from immediately penetrating into the material.
Then, wipe the entire surface with a cloth dampened with warm water.
Ultra High Performance Concrete contains non-toxic structural polyethylene fibres, which have been added to the cementitious mixture to provide reinforcement.
The presence of these fibres on the surface is a typical characteristic of cement, and therefore must never be considered as a defect, but instead, an indication of quality. To limit this phenomenon, pass an abrasive disk (provided on request) over the fibres that appear on the surface of your cement product.
The particular pattern of the disk captures the fibres and cuts them off at the base.
Please remember, also, that sometimes crazing can occur on the surface of cement.
The growth of tiny surface cracks cannot be considered as a defect because cement is naturally inclined to age in this manner.
Therefore, it would be unrealistic for us to guarantee that this cement product will not form hairline cracks on the surface.

Instructions

Download PDF

Warranty

B&B Italia guarantees the cover, the feet, the materials, accessories and mechanisms making up the product for 26 months from the date of manufacture (as stated on the "Product data sheet - Guarantee") against any manufacturing defect including lacquering and frame of non-upholstery products. In any case, it has to be pointed out that the materials, even if adequately lightfast to sunlight and artificial light, may be subject to alterations over time due to prolonged exposure to light, washing and ordinary mechanical wear. The guarantee refers to original product manufacturing defects and consists of replacement or repair, free of charge, of the unusable or defective parts, ascertained and acknowledged as such by B&B Italia or its representative. The guarantee does not cover anomalies and spoilage due to:

normal wear over time;
illegitimate use;
inappropriate care with treatments not complying with the enclosed instructions.

Moreover, the guarantee does not cover defects of non-compliance that cannot be attributed to B&B Italia (e.g. incorrect assembling of the product and/or assembling not complying with the assembling instructions). This provision also applies to those products that are designed to be installed directly by the consumer, in the presence of correct and exhaustive instructions. The guarantee shall be forfeited if the products are unassembled, modified or repaired by anyone who is not authorised by B&B Italia. Any intervention made in guarantee does not interrupt the course thereof. To exercise the rights deriving from this guarantee, the relevant "Product data sheet - Guarantee" shall be forwarded to B&B Italia (to the address stated below) bearing the date of manufacture; said "Product data sheet - Guarantee" shall therefore be retained for the entire period during which the guarantee is valid. B&B Italia S.p.A. 22060 Novedrate (CO) Italy, Strada Provinciale 32 n.15 For the purpose of better preserving the product over time it is recommended:

not to jump or sit on the overhanging parts, the backrests and the armrests;
not to drag the product, lifting it instead, so as to avoid damages to the parts resting on the floor;
to protect the product against shocks and contact with pointed and sharp elements and liquids or detergents containing corrosive agents;
to follow the care instructions listed in the specific section of the material enclosed with the product.

Designer

Monica Armani

Born in Trento, Italy, daughter of an architect, Monica Armani’s own study in architecture evolved into a distinctly disciplined approach to her design process: Design in Molecules.

Years of international experience has systematically identified these molecules, and the success of every project lies in their disciplined application. Monica Armani designs collections of objects and accessories for Italian and international companies.

Her collections have become best sellers and references in the sector.