Ray
Antonio Citterio
Product Codes
Sofa
| RY235N | RYL275N | RYLG275N |
| RYG235N |
Terminal Element
| RY160DN | RY232SN | RYL249DN |
| RY160SN | RYL160DN | RYL249SN |
| RY232DN | RYL160SN |
Ottoma-Terminal Element
| RY160TPD | RY160TPS |
Chaise Longue
| RY160LD | RY232LDN | RYL249LDN |
| RY160LS | RY232LSN | RYL249LSN |
Bench
| RY183P |
Cushion
| RY48C | RY72C | RY72CP |
| RY60C |
Warnings
- Keep for reference: read carefully.
- Always remember to be careful not to use the product improperly, considering its designated functions.
- When the product is no longer used, do not abandon it, but take it to a suitable public waste collection facility.
This product sheet complies with the legal obligations pursuant to the "Consumer Code" Decree n. 206 dated 6/9/2005 and the "Actuation Regulation" Decree n. 101 dated 8/2/1997.
Materials
Internal frame
tubular steel and steel profiles
Internal frame upholstery
flexible cold shaped polyurethane foam, polyester fibre cover
Internal frame upholstery (RY183P)
shaped polyurethane of different density, polyester fibre cover
Seat cushion upholstery
shaped polyurethane of different density, sterilized down, polyester and cotton fibre cover
Back cushion upholstery (RYG235N-RYLG275N)
shaped polyurethane, polyester fibre, polyester and cotton fibre cover
Back cushion (RY48C-RY72C-RY72CP)
polyester fibre, box style typology, blanket stitching
Feet
die-cast aluminium
Ferrules
thermoplastic material
Cover
fabric or leather (blanket stitching)
tubular steel and steel profiles
Internal frame upholstery
flexible cold shaped polyurethane foam, polyester fibre cover
Internal frame upholstery (RY183P)
shaped polyurethane of different density, polyester fibre cover
Seat cushion upholstery
shaped polyurethane of different density, sterilized down, polyester and cotton fibre cover
Back cushion upholstery (RYG235N-RYLG275N)
shaped polyurethane, polyester fibre, polyester and cotton fibre cover
Back cushion (RY48C-RY72C-RY72CP)
polyester fibre, box style typology, blanket stitching
Feet
die-cast aluminium
Ferrules
thermoplastic material
Cover
fabric or leather (blanket stitching)
Maintenance
Cover
- For home washing of covers, follow the symbols on the technical sheet that came with the product.
- Periodically adjust the Velcro fasteners to remove folds and creases due to normal use of the product.
- If there are no Velcro fasteners, smooth the cover manually from the inside towards the outside.
- For ordinary cleaning, dust with a soft dry cotton cloth.
- If liquids should accidentally fall on the surface, remove them immediately and dry with paper towels.
- The surface can then be cleaned with a white cotton or microfibre cloth, slightly damp with water and neutral soap, and then dried in a well-ventilated place.
- In case of stains, act immediately to blot the stain with a clean white cloth and, if necessary, remove the dirt with a spoon or knife, using the flat part horizontally and being very careful to not ruin the cover.
- Dab the stain from the outer edges inward to avoid rings.
- All actions must be done with circular movements, without exerting excessive mechanical pressure.
- Our Stores and dealers sell the specific 'Kit for leather maintenance and cleaning' by B&B Italia (code SETPN), which contains products suitable for the protection and cleaning of your leather product.
Upholstery
- Manually punch the cushions on all sides, fluff them up to air the padding and restore the original volume.
- For best results, remove the cushion covers regularly, knead and fluff up the padding, and air it possibly outdoors before slipping on the cover once again.
- If possible, periodically change the position of the most used cushions with the less used ones.
Aluminium
- We advise using normal commercial products for cleaning delicate surfaces and/or warm water and neutral soap.
- Never use abrasives or products containing solvents, ammonia and/or alcohol.
- Make sure to dry the surfaces completely after washing.
Instructions
Designer
Antonio Citterio
Antonio Citterio was born in Meda (Milano) in 1950, and started his design office in 1972, graduating in architecture at the Politecnico di Milano in 1975. Between 1987 and 1996 he worked in association with Terry Dwan and, together, they designed buildings in Europe and Japan.
In 2000, with Patricia Viel, he founded a practice for architecture and interior design, developing international complex long-term projects, at all scales and in synergy with a qualified network of specialist consultants. The studio has today taken the name of "Antonio Citterio Patricia Viel". Antonio Citterio currently works in the industrial design sector with numerous Italian and foreign companies. In 1987 and in 1994 he was awarded the Compasso d’Oro-ADI. From 2006 to 2016 he has been professor of Architectural Design at the Mendrisio Academy of Architecture (Switzerland). In 2008 he was honoured by the Royal Society for the Encouragement of Arts, Manufactures & Commerce of London, which gave him the title of “Royal Designer for Industry”.
Antonio Citterio is art director of Maxalto, Arclinea and Azucena.
In 2000, with Patricia Viel, he founded a practice for architecture and interior design, developing international complex long-term projects, at all scales and in synergy with a qualified network of specialist consultants. The studio has today taken the name of "Antonio Citterio Patricia Viel". Antonio Citterio currently works in the industrial design sector with numerous Italian and foreign companies. In 1987 and in 1994 he was awarded the Compasso d’Oro-ADI. From 2006 to 2016 he has been professor of Architectural Design at the Mendrisio Academy of Architecture (Switzerland). In 2008 he was honoured by the Royal Society for the Encouragement of Arts, Manufactures & Commerce of London, which gave him the title of “Royal Designer for Industry”.
Antonio Citterio is art director of Maxalto, Arclinea and Azucena.