Progetto 1

Product Codes

Table

P1T0808C	P1T1708CB2	P1T2508C
P1T0808CA1	P1T1710C	P1T2508CA2
P1T1006C	P1T1710CA2	P1T2508CB2
P1T1006CA1	P1T1717C	P1T2510C
P1T1010C	P1T1717CA1	P1T2510CA1
P1T1010CA1	P1T1717CA2	P1T2510CA2
P1T1508C	P1T1717CB1	P1T2510CB1
P1T1508CA1	P1T1717CB2	P1T2515C
P1T1508CA2	P1T2008C	P1T2515CA1
P1T1508CB1	P1T2008CA2	P1T2515CA3
P1T1515C	P1T2008CB2	P1T2515CB1
P1T1515CA1	P1T2010C	P1T2515CB3
P1T1515CB1	P1T2010CA2	P1T2517C
P1T1706C	P1T2010CB2	P1T2517CA1
P1T1706CA2	P1T2506C	P1T2517CA3
P1T1706CB2	P1T2506CA2	P1T2517CB1
P1T1708C	P1T2506CB2	P1T2517CB3
P1T1708CA2

Cable Flap

P1CA	P1CL	P1CV
P1CB	P1CO

Shelf

P1S0506A	P1S0508AS	P1S0510B
P1S0506AS	P1S0508B	P1S1706A
P1S0506B	P1S0510A	P1S1706AS
P1S0508A	P1S0510AS	P1S1706B

Set Of Feet

P1F4P

Warnings

Keep for reference: read carefully.

Always remember to be careful not to use the product improperly, considering its designated functions.

When the product is no longer used, do not abandon it, but take it to a suitable public waste collection facility.

To maintain the quality and finish of the surface, it is advisable to use protective articles (e.g. placemats or trivets) under objects that could scratched it.

This product sheet complies with the legal obligations pursuant to the "Consumer Code" Decree n. 206 dated 6/9/2005 and the "Actuation Regulation" Decree n. 101 dated 8/2/1997.

Materials

Top
veneered wood particles panel or glass

Frame
drawn steel

Internal frame
drawn steel and steel sheet

Shelf with supports
drawn steel and steel sheet

Horizontal and vertical cable grommet
steel sheet

Square and rectangular cable grommet
steel sheet with lid in stainless steel

Vertebra cable holder
thermoplastic material

Ferrules
steel sheet, thermoplastic material

Adjustable ferrules
steel and thermoplastic material

Maintenance

Wood - Painting

For weekly maintenance, dust the surface with a dry cloth.
For dried dirt, use a well-squeezed out cloth, damp with warm water.
For greasy or oily dirt, use a damp sponge and dish washing detergent, and then wipe with a well-squeezed out cloth damp with warm water.
Warning! Apply the detergent directly on the damp sponge, and never on directly on the furniture.
Do not exert excessive pressure and always follow the grain on wood furniture.
Note that if you press or rub too hard, surfaces can become 'polished'.
Avoid using abrasives and products containing solvents, ammonia and/or alcohol.
Make sure to dry the surfaces completely after washing.

Glass

Dust the entire surface carefully to remove any dust (use a soft white cloth).
We advise using normal commercial products for cleaning delicate surfaces.
Rub the surface to be cleaned gently without concentrating just on the area requiring attention: start instead with a larger section and gradually work your way towards the area in the middle.
That way, you will avoid rings or scratches forming, which may be produced if you apply too much pressure to the surface.
Never use solvents or abrasive detergents.

Steel

We advise using normal commercial products for cleaning delicate surfaces and/or warm water and neutral soap.
Never use abrasives or products containing solvents, ammonia and/or alcohol.
Make sure to dry the surfaces completely after washing.

Stainless steel

Stainless steel requires periodic cleaning with a solution of warm water and neutral soap, and then rinsing with plenty of water and drying carefully with a cloth or paper towels to avoid stains caused by hard water deposits.
For more specific cleaning, there are products available in stores that were specifically designed for stainless steel surfaces.
Never use solvents and abrasive detergents, chlorides, hydrochloric acid, bleaches with a hypochlorous base or strong acids, products for cleaning silver, abrasive sponges or scrapers. Avoid contact with very hot objects.
Warning! If this simple maintenance is not done, pitting can occur - a condition of ugly rust dots that can be removed with specific degreasing products.

Plastic material - Thermoplastic material

We advise using normal commercial products for cleaning delicate surfaces and/or warm water and neutral soap.
Never use abrasives or products containing solvents, ammonia and/or alcohol.
Make sure to dry the surfaces completely after washing.

Instructions

Download PDF

Designer

Monica Armani

Born in Trento, Italy, daughter of an architect, Monica Armani’s own study in architecture evolved into a distinctly disciplined approach to her design process: Design in Molecules.

Years of international experience has systematically identified these molecules, and the success of every project lies in their disciplined application. Monica Armani designs collections of objects and accessories for Italian and international companies.

Her collections have become best sellers and references in the sector.