Planck
Piero Lissoni
Product Codes
Small Table
| TPL120 | TPL50_L | TPL80 |
| TPL50 |
Warnings
- Keep for reference: read carefully.
- Always remember to be careful not to use the product improperly, considering its designated functions.
- When the product is no longer used, do not abandon it, but take it to a suitable public waste collection facility.
- To maintain the quality and finish of the surface, it is advisable to use protective articles (e.g. placemats or trivets) under objects that could scratched it.
This product sheet complies with the legal obligations pursuant to the "Consumer Code" Decree n. 206 dated 6/9/2005 and the "Actuation Regulation" Decree n. 101 dated 8/2/1997.
Materials
Top
tempered semi-transparent etched glass
External frame
curved in poplar plywood, MDF wood fibre, multi-laminate veneer or hard polyurethane
Internal frame
wood particles with melamine faced cover
Ferrules
plastic material
LED lighting system (TPL50_L)
Strip LED 24V DC from 3000K to 5000K
- Power supply with bluetooth control unit: input voltage 110-240V 50-60Hz, output voltage 24V DC, maximum wattage 18W
tempered semi-transparent etched glass
External frame
curved in poplar plywood, MDF wood fibre, multi-laminate veneer or hard polyurethane
Internal frame
wood particles with melamine faced cover
Ferrules
plastic material
LED lighting system (TPL50_L)
Strip LED 24V DC from 3000K to 5000K
- Power supply with bluetooth control unit: input voltage 110-240V 50-60Hz, output voltage 24V DC, maximum wattage 18W
Maintenance
Glass
- Dust the entire surface carefully to remove any dust (use a soft white cloth).
- We advise using normal commercial products for cleaning delicate surfaces.
- Rub the surface to be cleaned gently without concentrating just on the area requiring attention: start instead with a larger section and gradually work your way towards the area in the middle.
- That way, you will avoid rings or scratches forming, which may be produced if you apply too much pressure to the surface.
- Never use solvents or abrasive detergents.
Polyurethane - Polyethylene
- We recommend to simply wipe with a wet cloth.
- Absolutely do not use abrasive products containing solvents, detergents and/or alcohol.
- Dry all surfaces accurately after washing.
Wood - Painting
- For weekly maintenance, dust the surface with a dry cloth.
- For dried dirt, use a well-squeezed out cloth, damp with warm water.
- For greasy or oily dirt, use a damp sponge and dish washing detergent, and then wipe with a well-squeezed out cloth damp with warm water.
- Warning! Apply the detergent directly on the damp sponge, and never on directly on the furniture.
- Do not exert excessive pressure and always follow the grain on wood furniture.
- Note that if you press or rub too hard, surfaces can become 'polished'.
- Avoid using abrasives and products containing solvents, ammonia and/or alcohol.
- Make sure to dry the surfaces completely after washing.
Led
- The luminaire is classified as EEE (electrical and electronic equipment) and must be disposed of in compliance with regulations.
- Individual LED in the bar cannot be replaced. If one malfunctions, it is necessary to replace the entire bar.
- Clean the luminaire only when disconnected from the power mains.
- Clean only with a dry cloth.
Instructions
End of life instructions
- Take the top to the proper public separate collection facility in the area reserved for glass.
- Remove the supports and take them to the area reserved for plastic materials.
- Only for the TPL50_L model, take the luminous panel to the area reserved for the disposal of electric and electronic equipment.
- If the frame is made of wood, take it to the area reserved for wood, whereas if it is lacquered, take it to the non-recyclable waste area.
- Take the base to the proper public separate collection facility in the area reserved for wood.
- Take the baseboard to the area reserved for wood, the power supply unit and power cable to the area reserved for electrical material (only for the TPL50_L model), and the ferrules to the area reserved for plastic materials.
Warranty
B&B Italia guarantees the cover, the feet, the materials, accessories and mechanisms making up the product for 26 months from the date of manufacture (as stated on the "Product data sheet - Guarantee") against any manufacturing defect including lacquering and frame of non-upholstery products. In any case, it has to be pointed out that the materials, even if adequately lightfast to sunlight and artificial light, may be subject to alterations over time due to prolonged exposure to light, washing and ordinary mechanical wear. The guarantee refers to original product manufacturing defects and consists of replacement or repair, free of charge, of the unusable or defective parts, ascertained and acknowledged as such by B&B Italia or its representative. The guarantee does not cover anomalies and spoilage due to:
Moreover, the guarantee does not cover defects of non-compliance that cannot be attributed to B&B Italia (e.g. incorrect assembling of the product and/or assembling not complying with the assembling instructions). This provision also applies to those products that are designed to be installed directly by the consumer, in the presence of correct and exhaustive instructions. The guarantee shall be forfeited if the products are unassembled, modified or repaired by anyone who is not authorised by B&B Italia. Any intervention made in guarantee does not interrupt the course thereof. To exercise the rights deriving from this guarantee, the relevant "Product data sheet - Guarantee" shall be forwarded to B&B Italia (to the address stated below) bearing the date of manufacture; said "Product data sheet - Guarantee" shall therefore be retained for the entire period during which the guarantee is valid. B&B Italia S.p.A. 22060 Novedrate (CO) Italy, Strada Provinciale 32 n.15 For the purpose of better preserving the product over time it is recommended:
- normal wear over time;
- illegitimate use;
- inappropriate care with treatments not complying with the enclosed instructions.
Moreover, the guarantee does not cover defects of non-compliance that cannot be attributed to B&B Italia (e.g. incorrect assembling of the product and/or assembling not complying with the assembling instructions). This provision also applies to those products that are designed to be installed directly by the consumer, in the presence of correct and exhaustive instructions. The guarantee shall be forfeited if the products are unassembled, modified or repaired by anyone who is not authorised by B&B Italia. Any intervention made in guarantee does not interrupt the course thereof. To exercise the rights deriving from this guarantee, the relevant "Product data sheet - Guarantee" shall be forwarded to B&B Italia (to the address stated below) bearing the date of manufacture; said "Product data sheet - Guarantee" shall therefore be retained for the entire period during which the guarantee is valid. B&B Italia S.p.A. 22060 Novedrate (CO) Italy, Strada Provinciale 32 n.15 For the purpose of better preserving the product over time it is recommended:
- not to jump or sit on the overhanging parts, the backrests and the armrests;
- not to drag the product, lifting it instead, so as to avoid damages to the parts resting on the floor;
- to protect the product against shocks and contact with pointed and sharp elements and liquids or detergents containing corrosive agents;
- to follow the care instructions listed in the specific section of the material enclosed with the product.
Designer
Piero Lissoni
Piero Lissoni is architect, art director and designer and is recognized as one of the masters of contemporary design. He possesses an almost forty-year history in the development of projects the world over in the fields of architecture, landscape, interior, product and graphic design. He is also art director for Alpi, Boffi, Living Divani, Lualdi, Porro and Sanlorenzo.
Some of the most important architecture and interior projects deserving of mention include the AP House Milan for Audemars Piguet (2024), the new headquarters of Banca Ifis in Rome (2024), the Dorothea Hotel Autograph Collection for Marriott International in Budapest (2023), the AKA hotels in New York and Alexandria, Virginia (2023), the design of The Haven, an exclusive area inside the NCL Norwegian Prima cruise ship (2022), the Shangri-La Shougang Park in Beijing (2021) realized for the 2022 winter Olympics, The Ritz Carlton Residences in Miami Beach (2020), the Grand Park Hotel in Rovinj, Croatia (2019), the restyling of the historic Camparino in Galleria Bar in Milan (2019), The Middle House for the Swire Hotels Group in Shanghai (2018), the residential projects One Paraiso and Grand Paraiso in Miami (2018), The Oberoi Al Zorah Beach Resort Ajman in the UAE (2017), the interiors of a series of yachts for Sanlorenzo (2017 2020), the Conservatorium Hotel in Amsterdam (2012), the renovation of the historic Teatro Nazionale in Milan (2009), in addition to the corporate headquarters for companies such as Boffi, Glas Italia, Fantini, Living Divani and the shipyards of Sanlorenzo in La Spezia and Ameglia.
Piero Lissoni has received a series of international awards, including the Compasso d’Oro Career Award, two Compasso d'Oro ADI, the Good Design Award and the Red Dot Award.
Some of the most important architecture and interior projects deserving of mention include the AP House Milan for Audemars Piguet (2024), the new headquarters of Banca Ifis in Rome (2024), the Dorothea Hotel Autograph Collection for Marriott International in Budapest (2023), the AKA hotels in New York and Alexandria, Virginia (2023), the design of The Haven, an exclusive area inside the NCL Norwegian Prima cruise ship (2022), the Shangri-La Shougang Park in Beijing (2021) realized for the 2022 winter Olympics, The Ritz Carlton Residences in Miami Beach (2020), the Grand Park Hotel in Rovinj, Croatia (2019), the restyling of the historic Camparino in Galleria Bar in Milan (2019), The Middle House for the Swire Hotels Group in Shanghai (2018), the residential projects One Paraiso and Grand Paraiso in Miami (2018), The Oberoi Al Zorah Beach Resort Ajman in the UAE (2017), the interiors of a series of yachts for Sanlorenzo (2017 2020), the Conservatorium Hotel in Amsterdam (2012), the renovation of the historic Teatro Nazionale in Milan (2009), in addition to the corporate headquarters for companies such as Boffi, Glas Italia, Fantini, Living Divani and the shipyards of Sanlorenzo in La Spezia and Ameglia.
Piero Lissoni has received a series of international awards, including the Compasso d’Oro Career Award, two Compasso d'Oro ADI, the Good Design Award and the Red Dot Award.