Moor Outdoor
Vincent Van Duysen
Product Codes
| OMR_P |
Repairability and other warnings
Reparability information
To help preserve the product over time and extend its useful life, B&B Italia supports, where technically feasible, the maintenance, repair and replacement of product components through its Customer Service department and network of authorised dealers.
How to Request Assistance
For information about product repairability, the availability of spare parts, the cost of any required work or the applicable service procedures, please contact B&B Italia Customer Service. Full contact details, including telephone number and email address, are available in the «Contacts» section of the B&B Italia website.
Alternatively, you may contact an authorised B&B Italia dealer. The list of authorised dealers is available in the «Store Locator» section.
Each request will be assessed on a case-by-case basis to identify the most appropriate solution, taking into account the specific characteristics and condition of the product.
Maintenance
Proper maintenance helps preserve the product’s quality, functionality and appearance over time.
Please follow the use and maintenance instructions provided by B&B Italia. Any maintenance or repair work must be carried out exclusively through service channels authorised by B&B Italia.
- Always remember to be careful not to use the product improperly, considering its designated functions.
- When the product is no longer used, do not abandon it, but take it to a suitable public waste collection facility.
- Do not place the product in overly damp environments (e.g. saunas) and in direct contact with water (e.g. sea water, chlorinated water, snow).
- Do not immerse in tanks and swimming pools, and do not place at the water’s edge.
- Oil stains and suncare lotions must be immediately cleaned.
- If the products are placed outdoor and not used for a period of time, it is necessary to protect them with their specifically designed water-proof cover to prevent damage. Before covering, ensure that the product is sufficiently dry in order to prevent degradation/deterioration.
- Keep out of reach of children in order to prevent entanglement and suffocation.
- Do not cover the furnishing when someone is still sitting.
This product sheet complies with the legal obligations pursuant to the "Consumer Code" Decree n. 206 dated 6/9/2005 and the "Actuation Regulation" Decree n. 101 dated 8/2/1997.
Materials
die-cast aluminium and extrusions with polyester powder painting
Interlacing
polyethylene
Headrest upholstery
shaped polyurethane, polyester fibre cover
Ferrules
thermoplastic material
Waterproof cover cloth
PES fabric coated on one side in PU
Headrest cover
fabric Lume
Maintenance
Polyethylene
- Dust the product regularly to prevent dust build-up and to maintain the original look and conditions.
- To eliminate impurities (e.g. dirt, stains), use a soft white cotton cloth damp with water or a solution of water and neutral detergent. Be careful to not use excessive pressure.
- Do not use abrasive products, alcohol and chemical solvents.
- Pay particular attention to contact with cosmetics (e.g. lipstick, foundation, mascara, nail polish, creams) and drinks such as fruit juice, because these are difficult to remove.
- Since the polypropylene weave is a textile product, we advise users to avoid mechanical rubbing, scratches and all improper uses that could cause the threads to become frayed.
Aluminium
- We advise using normal commercial products for cleaning delicate surfaces and/or warm water and neutral soap.
- Never use abrasives or products containing solvents, ammonia and/or alcohol.
- Make sure to dry the surfaces completely after washing.
Upholstery
- We suggest to remove cushion covers monthly and fluff up as instructed above. Pat down cushions manually (“fluffing up”), making sure you alternate positions (where possible, switch the most used cushions with the ones used the least). By “fluffing up” we mean shaking the cushion on all sides (seat/side panels).
- We recommend doing this by lifting the cushions off the sofa/armchair frame to allow for improved air circulation.
- Once cushions have been fluffed up as above, air the padding, outside if possible, for approximately 30 minutes before refitting the covers.
Cover cloth
- Elasticised technical textile, waterproof, developed to protect furniture from weather when not in use.
- If condensation forms under the cloth, it will not damage product quality.
- Wash the cloth according to the instructions printed on the underside of the cloth and let dry completely in the open air before storing in a closed place in order to prevent mould from forming.
- When the product is no longer used, do not abandon it, but take it to a suitable public waste collection facility.
- Always remember to be careful not to use the product improperly, considering its designated functions.