Mirto Outdoor

Product Codes

Small Table

MI200_4	MI55_5	MI90Q_4G
MI200_4G	MI90Q_4	TMO82Q_4
MI54T

Low Table

MI120Q_4	MI120_4G	MI180_4G
MI120Q_4G	MI180_4	TMO162_4
MI120_4

Cover Cloth

MI120Q_4FN	MI200_4FN	TMO162_4F
MI120_4FN	MI90Q_4FN	TMO82Q_4F
MI180_4FN

Warnings

Keep for reference: read carefully.

Always remember to be careful not to use the product improperly, considering its designated functions.

When the product is no longer used, do not abandon it, but take it to a suitable public waste collection facility.

Do not place the product in overly damp environments (e.g. saunas) and in direct contact with water (e.g. sea water, chlorinated water, snow).

Do not immerse in tanks and swimming pools, and do not place at the water’s edge.

Oil stains and suncare lotions must be immediately cleaned.

Due to prolonged exposure to direct sun light the surface may become hot to touch. Special attention required.

The stoneware material is resistant to all types of weather and, being partially hygroscopic, it is necessary to ensure proper transpiration. Therefore, in order to prevent potential breakage, do not cover with sheets.

To maintain the quality and finish of the surface, it is advisable to use protective articles (e.g. placemats or trivets) under objects that could scratched it.

If the products are placed outdoor and not used for a period of time, it is necessary to protect them with their specifically designed water-proof cover to prevent damage. Before covering, ensure that the product is sufficiently dry in order to prevent degradation/deterioration.

Keep out of reach of children in order to prevent entanglement and suffocation.

Do not cover the furnishing when someone is still sitting.

This product sheet complies with the legal obligations pursuant to the "Consumer Code" Decree n. 206 dated 6/9/2005 and the "Actuation Regulation" Decree n. 101 dated 8/2/1997.

Materials

Frame
die-cast aluminium and extrusions with polyurethane painting

Top
aluminium sheet with polyurethane painting, porcelain stoneware or enamelled lava stone on aluminium top

Frame and top (MI54T-MI55_5)
die-cast aluminium with polyurethane painting

Ferrules
thermoplastic elastomer

Waterproof cover cloth
PES fabric coated on one side in PU

Maintenance

Stoneware

For periodic cleaning, use a solution of warm water and neutral soap, rinse with plenty of water and dry carefully with a cloth or paper towels.
Never use steel wool.
Stoneware items do not absorb grease, liquids, and substances that leave indelible marks on other materials (e.g. coffee, lemon juice, coca cola).
These products are made of a ceramic mix fired at high temperature (1230 °C) using a single-firing technique, set up by preparing their own special composition of clays and selected minerals.
The high temperature single-firing technique causes the ceramic mix to combine with the enamel at very high temperature, and, as this vitrifies it makes the surface perfectly hygienic and resistant to both abrasion and attack by acid substances.
The enameled surface is therefore extremely hard and resistant to the weather and extreme temperatures.

Stone

For normal maintenance, we advise using a microfibre cloth damp with warm water.
In case of stains caused by liquids and/or greasy substances, blot/remove the stain immediately and then wipe the entire surface with a cloth damp with warm water and neutral detergent. Rinse with water.
Never use solvents and always avoid contact with very hot objects (e.g. flatware, coffee pots, teapots).

Aluminium

We advise using normal commercial products for cleaning delicate surfaces and/or warm water and neutral soap.
Never use abrasives or products containing solvents, ammonia and/or alcohol.
Make sure to dry the surfaces completely after washing.

Cover cloth

Elasticised technical textile, waterproof, developed to protect furniture from weather when not in use.
If condensation forms under the cloth, it will not damage product quality.
Wash the cloth according to the instructions printed on the underside of the cloth and let dry completely in the open air before storing in a closed place in order to prevent mould from forming.
When the product is no longer used, do not abandon it, but take it to a suitable public waste collection facility.
Always remember to be careful not to use the product improperly, considering its designated functions.

Designer

Antonio Citterio

Antonio Citterio was born in Meda (Milano) in 1950, and started his design office in 1972, graduating in architecture at the Politecnico di Milano in 1975. Between 1987 and 1996 he worked in association with Terry Dwan and, together, they designed buildings in Europe and Japan.

In 2000, with Patricia Viel, he founded a practice for architecture and interior design, developing international complex long-term projects, at all scales and in synergy with a qualified network of specialist consultants. The studio has today taken the name of "Antonio Citterio Patricia Viel". Antonio Citterio currently works in the industrial design sector with numerous Italian and foreign companies. In 1987 and in 1994 he was awarded the Compasso d’Oro-ADI. From 2006 to 2016 he has been professor of Architectural Design at the Mendrisio Academy of Architecture (Switzerland). In 2008 he was honoured by the Royal Society for the Encouragement of Arts, Manufactures & Commerce of London, which gave him the title of “Royal Designer for Industry”.

Antonio Citterio is art director of Maxalto, Arclinea and Azucena.