Product identity

Product Codes

Storage Unit

LG250_1N	LG250_3SL	LGB250_2S
LG250_1R	LG250_4N	LGB250_2SL
LG250_1S	LG250_4R	LGB250_3N
LG250_1SL	LG250_4S	LGB250_3R
LG250_2N	LG250_4SL	LGB250_3S
LG250_2R	LGB250_1N	LGB250_3SL
LG250_2S	LGB250_1R	LGB250_4N
LG250_2SL	LGB250_1S	LGB250_4R
LG250_3N	LGB250_1SL	LGB250_4S
LG250_3R	LGB250_2N	LGB250_4SL
LG250_3S	LGB250_2R

Shelf

LG4_L

Warnings

Keep for reference: read carefully.

When the product is no longer used, do not abandon it, but take it to a suitable public waste collection facility.

Always remember to be careful not to use the product improperly, considering its designated functions.

Considering the particular aesthetics of the product, during use, the doors opening must not exceed 90°.

Do not rest objects or weights on the open flap doors of the storage units.

To maintain the quality and finish of the surface, it is advisable to use protective articles (e.g. placemats or trivets) under objects that could scratched it.

This product sheet complies with the legal obligations pursuant to the "Consumer Code" Decree n. 206 dated 6/9/2005 and the "Actuation Regulation" Decree n. 101 dated 8/2/1997.

Materials

External frame (sides, back panel and base)
veneered MDF wood fibre panel

Door and drawer front
veneered MDF wood fibre panel or marble (matt natural finish or gloss natural finish)

Base-frame
steel profiles

Feet
plastic material

Shelf
glass

Extractable tray and cutlery holder
veneered MDF wood fibre

Internal drawer
bottom base and back panel in wood particles with melamine faced cover, edges in aluminium with complete opening and cushioned runners

LED lighting system
Strip LED 24V DC 3000K
- Power supply unit: input voltage 110-240V 50-60Hz, output voltage 12-24V DC, maximum wattage 18W-48W
- Switch with presence sensor with electronic power supply unit: voltage 110-240V 50-60Hz

Maintenance

Wood - Painting

For weekly maintenance, dust the surface with a dry cloth.
For dried dirt, use a well-squeezed out cloth, damp with warm water.
For greasy or oily dirt, use a damp sponge and dish washing detergent, and then wipe with a well-squeezed out cloth damp with warm water.
Warning! Apply the detergent directly on the damp sponge, and never on directly on the furniture.
Do not exert excessive pressure and always follow the grain on wood furniture.
Note that if you press or rub too hard, surfaces can become 'polished'.
Avoid using abrasives and products containing solvents, ammonia and/or alcohol.
Make sure to dry the surfaces completely after washing.

Marble (natural)

For normal maintenance, we advise using a microfibre cloth damp with warm water.
In case of stains caused by liquids and/or greasy substances, blot/remove the stain immediately and then wipe the entire surface with a cloth damp with warm water.
Never use solvents or abrasive detergents, and always avoid contact with very hot objects (e.g. flatware, coffee pots, teapots).
To maintain the quality and finish of the surface over time, it is advisable to use protection on the surface (e.g. placemats or trivets) under objects that could scratch it.
Warming! Natural marbles are not finished in any way, therefore it is possible to notice filled cracks on the product.

Steel

We advise using normal commercial products for cleaning delicate surfaces and/or warm water and neutral soap.
Never use abrasives or products containing solvents, ammonia and/or alcohol.
Make sure to dry the surfaces completely after washing.

Led

The luminaire is classified as EEE (electrical and electronic equipment) and must be disposed of in compliance with regulations.
Individual LED in the bar cannot be replaced. If one malfunctions, it is necessary to replace the entire bar.
Clean the luminaire only when disconnected from the power mains.
Clean only with a dry cloth.

Instructions

Download PDF

Warranty

B&B Italia guarantees the cover, the feet, the materials, accessories and mechanisms making up the product for 26 months from the date of manufacture (as stated on the "Product data sheet - Guarantee") against any manufacturing defect including lacquering and frame of non-upholstery products. In any case, it has to be pointed out that the materials, even if adequately lightfast to sunlight and artificial light, may be subject to alterations over time due to prolonged exposure to light, washing and ordinary mechanical wear. The guarantee refers to original product manufacturing defects and consists of replacement or repair, free of charge, of the unusable or defective parts, ascertained and acknowledged as such by B&B Italia or its representative. The guarantee does not cover anomalies and spoilage due to:

normal wear over time;
illegitimate use;
inappropriate care with treatments not complying with the enclosed instructions.

Moreover, the guarantee does not cover defects of non-compliance that cannot be attributed to B&B Italia (e.g. incorrect assembling of the product and/or assembling not complying with the assembling instructions). This provision also applies to those products that are designed to be installed directly by the consumer, in the presence of correct and exhaustive instructions. The guarantee shall be forfeited if the products are unassembled, modified or repaired by anyone who is not authorised by B&B Italia. Any intervention made in guarantee does not interrupt the course thereof. To exercise the rights deriving from this guarantee, the relevant "Product data sheet - Guarantee" shall be forwarded to B&B Italia (to the address stated below) bearing the date of manufacture; said "Product data sheet - Guarantee" shall therefore be retained for the entire period during which the guarantee is valid. B&B Italia S.p.A. 22060 Novedrate (CO) Italy, Strada Provinciale 32 n.15 For the purpose of better preserving the product over time it is recommended:

not to jump or sit on the overhanging parts, the backrests and the armrests;
not to drag the product, lifting it instead, so as to avoid damages to the parts resting on the floor;
to protect the product against shocks and contact with pointed and sharp elements and liquids or detergents containing corrosive agents;
to follow the care instructions listed in the specific section of the material enclosed with the product.

Designer

Piero Lissoni

Piero Lissoni is architect, art director and designer and is recognized as one of the masters of contemporary design. He possesses an almost forty-year history in the development of projects the world over in the fields of architecture, landscape, interior, product and graphic design. He is also art director for Alpi, Boffi, Living Divani, Lualdi, Porro and Sanlorenzo.

Some of the most important architecture and interior projects deserving of mention include the AP House Milan for Audemars Piguet (2024), the new headquarters of Banca Ifis in Rome (2024), the Dorothea Hotel Autograph Collection for Marriott International in Budapest (2023), the AKA hotels in New York and Alexandria, Virginia (2023), the design of The Haven, an exclusive area inside the NCL Norwegian Prima cruise ship (2022), the Shangri-La Shougang Park in Beijing (2021) realized for the 2022 winter Olympics, The Ritz Carlton Residences in Miami Beach (2020), the Grand Park Hotel in Rovinj, Croatia (2019), the restyling of the historic Camparino in Galleria Bar in Milan (2019), The Middle House for the Swire Hotels Group in Shanghai (2018), the residential projects One Paraiso and Grand Paraiso in Miami (2018), The Oberoi Al Zorah Beach Resort Ajman in the UAE (2017), the interiors of a series of yachts for Sanlorenzo (2017 2020), the Conservatorium Hotel in Amsterdam (2012), the renovation of the historic Teatro Nazionale in Milan (2009), in addition to the corporate headquarters for companies such as Boffi, Glas Italia, Fantini, Living Divani and the shipyards of Sanlorenzo in La Spezia and Ameglia.

Piero Lissoni has received a series of international awards, including the Compasso d’Oro Career Award, two Compasso d'Oro ADI, the Good Design Award and the Red Dot Award.