Product identity

Product Codes

Armchair

H1M	H3M	H4M
H2M

Swivel Armchair

H1G	H3G	H4G
H2G

Footrest

HP4

HP4M

Warnings

Keep for reference: read carefully.

Always remember to be careful not to use the product improperly, considering its designated functions.

When the product is no longer used, do not abandon it, but take it to a suitable public waste collection facility.

This product sheet complies with the legal obligations pursuant to the "Consumer Code" Decree n. 206 dated 6/9/2005 and the "Actuation Regulation" Decree n. 101 dated 8/2/1997.

Materials

Shell
plastic material Hirek®

Shell upholstery
polyester fibre, cotton cover

Seat support
shaped polyurethane, non-slip fabric

Swivel base-frame (H1G-H2G-H3G-H4G)
die-cast aluminium, steel profiles, hard polyurethane or solid wood

Base-frame (HP4)
steel profiles, hard polyurethane or solid wood

Base-frame (H1M-H2M-H3M-H4M-HP4M)
aluminium die-cast and profiles

Ferrules
plastic material

Cover
fabric or leather

Maintenance

Cover

For home washing of covers, follow the symbols on the technical sheet that came with the product.
Periodically adjust the Velcro fasteners to remove folds and creases due to normal use of the product.
If there are no Velcro fasteners, smooth the cover manually from the inside towards the outside.
For ordinary cleaning, dust with a soft dry cotton cloth.
If liquids should accidentally fall on the surface, remove them immediately and dry with paper towels.
The surface can then be cleaned with a white cotton or microfibre cloth, slightly damp with water and neutral soap, and then dried in a well-ventilated place.
In case of stains, act immediately to blot the stain with a clean white cloth and, if necessary, remove the dirt with a spoon or knife, using the flat part horizontally and being very careful to not ruin the cover.
Dab the stain from the outer edges inward to avoid rings.
All actions must be done with circular movements, without exerting excessive mechanical pressure.
Our Stores and dealers sell the specific 'Kit for leather maintenance and cleaning' by B&B Italia (code SETPN), which contains products suitable for the protection and cleaning of your leather product.

Upholstery

Manually punch the cushions on all sides, fluff them up to air the padding and restore the original volume.
For best results, remove the cushion covers regularly, knead and fluff up the padding, and air it possibly outdoors before slipping on the cover once again.
If possible, periodically change the position of the most used cushions with the less used ones.

Hirek®

Hirek® is a composite, multi-layered material made from a co-injection of prime quality copolyesters and polypropylenes that form an attractive external film, and polypropylene and regenerated polyethylene with a small percentage of minerals added to form the concealed internal structural part. It is completely reusable in standard injection production processes, with polypropylene or high density polyethylene. Production waste from Hirek® frames is entirely recycled, regenerated and reused in the co-injection production process for making the concealed internal structural part.

Water and neutral detergent are recommended for cleaning the Hirek® frame.
Avoid using abrasives and products containing solvents and/or alcohol.

Wood - Painting

For weekly maintenance, dust the surface with a dry cloth.
For dried dirt, use a well-squeezed out cloth, damp with warm water.
For greasy or oily dirt, use a damp sponge and dish washing detergent, and then wipe with a well-squeezed out cloth damp with warm water.
Warning! Apply the detergent directly on the damp sponge, and never on directly on the furniture.
Do not exert excessive pressure and always follow the grain on wood furniture.
Note that if you press or rub too hard, surfaces can become 'polished'.
Avoid using abrasives and products containing solvents, ammonia and/or alcohol.
Make sure to dry the surfaces completely after washing.

Polyurethane - Polyethylene

We recommend to simply wipe with a wet cloth.
Absolutely do not use abrasive products containing solvents, detergents and/or alcohol.
Dry all surfaces accurately after washing.

Aluminium - Steel

We advise using normal commercial products for cleaning delicate surfaces and/or warm water and neutral soap.
Never use abrasives or products containing solvents, ammonia and/or alcohol.
Make sure to dry the surfaces completely after washing.

Instructions

Download PDF

Warranty

B&B Italia guarantees the cover, the feet, the materials, accessories and mechanisms making up the product for 26 months from the date of manufacture (as stated on the "Product data sheet - Guarantee") against any manufacturing defect including lacquering and frame of non-upholstery products. In any case, it has to be pointed out that the materials, even if adequately lightfast to sunlight and artificial light, may be subject to alterations over time due to prolonged exposure to light, washing and ordinary mechanical wear. The guarantee refers to original product manufacturing defects and consists of replacement or repair, free of charge, of the unusable or defective parts, ascertained and acknowledged as such by B&B Italia or its representative. The guarantee does not cover anomalies and spoilage due to:

normal wear over time;
illegitimate use;
inappropriate care with treatments not complying with the enclosed instructions.

Moreover, the guarantee does not cover defects of non-compliance that cannot be attributed to B&B Italia (e.g. incorrect assembling of the product and/or assembling not complying with the assembling instructions). This provision also applies to those products that are designed to be installed directly by the consumer, in the presence of correct and exhaustive instructions. The guarantee shall be forfeited if the products are unassembled, modified or repaired by anyone who is not authorised by B&B Italia. Any intervention made in guarantee does not interrupt the course thereof. To exercise the rights deriving from this guarantee, the relevant "Product data sheet - Guarantee" shall be forwarded to B&B Italia (to the address stated below) bearing the date of manufacture; said "Product data sheet - Guarantee" shall therefore be retained for the entire period during which the guarantee is valid. B&B Italia S.p.A. 22060 Novedrate (CO) Italy, Strada Provinciale 32 n.15 For the purpose of better preserving the product over time it is recommended:

not to jump or sit on the overhanging parts, the backrests and the armrests;
not to drag the product, lifting it instead, so as to avoid damages to the parts resting on the floor;
to protect the product against shocks and contact with pointed and sharp elements and liquids or detergents containing corrosive agents;
to follow the care instructions listed in the specific section of the material enclosed with the product.

Designer

Patricia Urquiola

Patricia Urquiola studied architecture and design at the Universidad Politécnica de Madrid and completed her studies at the Politecnico di Milano where she graduated under the mentorship of Achille Castiglioni. In Spain, she was awarded the Golden Medal for Merits in Art and received the Cross of the Order of Isabella the Catholic.

In 2001 she founded her own studio where she specialised in industrial product design, architecture (hotel trade, retail, homes, exhibitions and installations), art direction and strategy consulting. She works with important design companies and international groups, and is part of the advisory board of the Politecnico of Milan university and the Triennale Milano Design Museum. She taught the master’s degree in Interior Design at the Domus Academy in Milan (2013-2015) and has given lectures at prestigious international universities.

She has also given talks at countless cultural events and her work is exhibited in many art and design museums across the world, including the MOMA in New York, the Musée des Arts Decoratifs in Paris, the Triennale Museum in Milan, the Victoria & Albert Museum in London, to name a few. She has been named Designer of the Year by many international magazines.