Flat.C Frame
Antonio Citterio
Product Codes
| CF123B_11 | CF148RCC_14 | CF98B_11 |
| CF123B_14 | CF198B_11 | CF98B_14 |
| CF123RCC_14 |
| CF198BCC_6D | CF198CC_6 | CF244BCC_9S |
| CF198BCC_6S | CF198CC_9 | CF244B_6 |
| CF198BCC_9D | CF244BCC_6D | CF244B_9 |
| CF198BCC_9S | CF244BCC_6S | CF244CC_6 |
| CF198B_6 | CF244BCC_9D | CF244CC_9 |
| CF198B_9 |
| CF12_2L | CF19_6L | CF9_2L |
| CF19_2RL | CF19_RC | CF24_R |
| CF19_R | CF24_2RL | CF24_RC |
| CF12_V | CF19_V | CF9_V |
Repairability and other warnings
Reparability information
To help preserve the product over time and extend its useful life, B&B Italia supports, where technically feasible, the maintenance, repair and replacement of product components through its Customer Service department and network of authorised dealers.
How to Request Assistance
For information about product repairability, the availability of spare parts, the cost of any required work or the applicable service procedures, please contact B&B Italia Customer Service. Full contact details, including telephone number and email address, are available in the «Contacts» section of the B&B Italia website.
Alternatively, you may contact an authorised B&B Italia dealer. The list of authorised dealers is available in the «Store Locator» section.
Each request will be assessed on a case-by-case basis to identify the most appropriate solution, taking into account the specific characteristics and condition of the product.
Maintenance
Proper maintenance helps preserve the product’s quality, functionality and appearance over time.
Please follow the use and maintenance instructions provided by B&B Italia. Any maintenance or repair work must be carried out exclusively through service channels authorised by B&B Italia.
- Always remember to be careful not to use the product improperly, considering its designated functions.
- When the product is no longer used, do not abandon it, but take it to a suitable public waste collection facility.
- Considering the particular aesthetics of the product, during use, the doors opening must not exceed 90°.
- Do not rest objects or weights on the open flap doors of the storage units.
- To maintain the quality and finish of the surface, it is advisable to use protective articles (e.g. placemats or trivets) under objects that could scratched it.
This product sheet complies with the legal obligations pursuant to the "Consumer Code" Decree n. 206 dated 6/9/2005 and the "Actuation Regulation" Decree n. 101 dated 8/2/1997.
Materials
painted or veneered MDF wood fibre panel covered in PVC
Internal frame
MDF ennobled or veneered MDF wood fibre panel
Hinged door and drawer front
MDF wood fibre panel with smooth or veneered polyester base
Flap door
veneered MDF wood fibre honeycomb panel
Drawer interior
metal sides, bottom base and back in MDF wood fibre panel, fully extractable guides with soft closing
Internal shelf and extractable tray
MDF wood fibre panel or veneered wood particles panel
Flap door compartment internal frame
MDF wood fibre panel covered with PMMA polymethacrylate material with mirror effect
Flap door compartment shelf
toughened glass
Base-frame
welded drawn steel frame
LED lighting system
Strip LED 24V DC 3000K
Power supply unit
input voltage 110V-120V/220V-240V 50Hz, output voltage 24V DC
Dimmable remote control
operating voltage 24V DC
Maintenance
Wood - Painting
- For weekly maintenance, dust the surface with a dry cloth.
- For dried dirt, use a well-squeezed out cloth, damp with warm water.
- For greasy or oily dirt, use a damp sponge and dish washing detergent, and then wipe with a well-squeezed out cloth damp with warm water.
- Warning! Apply the detergent directly on the damp sponge, and never on directly on the furniture.
- Do not exert excessive pressure and always follow the grain on wood furniture.
- Note that if you press or rub too hard, surfaces can become 'polished'.
- Avoid using abrasives and products containing solvents, ammonia and/or alcohol.
- Make sure to dry the surfaces completely after washing.
Shellac
- Easily scratched. Be very careful with this finish.
- For weekly maintenance, dust the surface with a cloth.
- For dried dirt, use a well-squeezed out cloth, damp with warm water.
- For greasy or oily dirt, use a sponge damp with warm water and dish washing detergent, and then wipe with a well-squeezed out cloth damp with warm water.
- Warning! Apply the detergent directly on the damp sponge, and never on directly on the furniture).
- Do not use excessive pressure and always follow the satin finish grain.
- Note that if you press or rub too hard, surfaces can become 'polished'.
- Avoid using abrasives and products containing solvents, ammonia and/or alcohol.
- Make sure to dry the surfaces completely after washing.
- Our Stores and dealers sell the specific 'Kit for shellac maintenance and cleaning' by B&B Italia (code SETPGM), which contains a detergent suitable for the protection and cleaning of your product’s shellac finish.
Steel
- We advise using normal commercial products for cleaning delicate surfaces and/or warm water and neutral soap.
- Never use abrasives or products containing solvents, ammonia and/or alcohol.
- Make sure to dry the surfaces completely after washing.
Warranty
Designer
In 2000, with Patricia Viel, he founded a practice for architecture and interior design, developing international complex long-term projects, at all scales and in synergy with a qualified network of specialist consultants. The studio has today taken the name of "Antonio Citterio Patricia Viel". Antonio Citterio currently works in the industrial design sector with numerous Italian and foreign companies. In 1987 and in 1994 he was awarded the Compasso d’Oro-ADI. From 2006 to 2016 he has been professor of Architectural Design at the Mendrisio Academy of Architecture (Switzerland). In 2008 he was honoured by the Royal Society for the Encouragement of Arts, Manufactures & Commerce of London, which gave him the title of “Royal Designer for Industry”.
Antonio Citterio is art director of Maxalto, Arclinea and Azucena.