Flair O' Outdoor

Product Codes

Chair

OFL60_A

OFL60_B

Cushion

OFL60SCW

OFL60SEW

Cover Cloth

OFL60_AF

OFL60_BF

Warnings

Keep for reference: read carefully.

Always remember to be careful not to use the product improperly, considering its designated functions.

When the product is no longer used, do not abandon it, but take it to a suitable public waste collection facility.

Do not place the product in overly damp environments (e.g. saunas) and in direct contact with water (e.g. sea water, chlorinated water, snow).

Do not immerse in tanks and swimming pools, and do not place at the water’s edge.

Oil stains and suncare lotions must be immediately cleaned.

If the products are placed outdoor and not used for a period of time, it is necessary to protect them with their specifically designed water-proof cover to prevent damage. Before covering, ensure that the product is sufficiently dry in order to prevent degradation/deterioration.

Keep out of reach of children in order to prevent entanglement and suffocation.

Do not cover the furnishing when someone is still sitting.

This product sheet complies with the legal obligations pursuant to the "Consumer Code" Decree n. 206 dated 6/9/2005 and the "Actuation Regulation" Decree n. 101 dated 8/2/1997.

Materials

Frame
tubular aluminium

Interlacing
polypropylene fibre braid

Back upholstery
recycled polyester fibre from PET, cover in water repellent polyester fibre

Seat upholstery
flexible polyurethane foam, cover in water repellent polyester fibre

Ferrules
thermoplastic material

Waterproof cover cloth
PES fabric coated on one side in PU

Cover
fabric in limited categories

Maintenance

Cover

For home washing of covers, follow the symbols on the technical sheet that came with the product.
Periodically adjust the Velcro fasteners to remove folds and creases due to normal use of the product.
If there are no Velcro fasteners, smooth the cover manually from the inside towards the outside.
For ordinary cleaning, dust with a soft dry cotton cloth.
If liquids should accidentally fall on the surface, remove them immediately and dry with paper towels.
The surface can then be cleaned with a white cotton or microfibre cloth, slightly damp with water and neutral soap, and then dried in a well-ventilated place.
In case of stains, act immediately to blot the stain with a clean white cloth and, if necessary, remove the dirt with a spoon or knife, using the flat part horizontally and being very careful to not ruin the cover.
Dab the stain from the outer edges inward to avoid rings.
All actions must be done with circular movements, without exerting excessive mechanical pressure.
Our Stores and dealers sell the specific 'Kit for leather maintenance and cleaning' by B&B Italia (code SETPN), which contains products suitable for the protection and cleaning of your leather product.

Upholstery

Manually punch the cushions on all sides, fluff them up to air the padding and restore the original volume.
For best results, remove the cushion covers regularly, knead and fluff up the padding, and air it possibly outdoors before slipping on the cover once again.
If possible, periodically change the position of the most used cushions with the less used ones.

Polypropylene

Dust the product regularly to prevent dust build-up and to maintain the original look and conditions.
To eliminate impurities (e.g. dirt, stains), use a soft white cotton cloth damp with water or a solution of water and neutral detergent. Be careful to not use excessive pressure.
Do not use abrasive products, alcohol and chemical solvents.
Pay particular attention to contact with cosmetics (e.g. lipstick, foundation, mascara, nail polish, creams) and drinks such as fruit juice, because these are difficult to remove.
Since the polypropylene weave is a textile product, we advise users to avoid mechanical rubbing, scratches and all improper uses that could cause the threads to become frayed.

Aluminium

We advise using normal commercial products for cleaning delicate surfaces and/or warm water and neutral soap.
Never use abrasives or products containing solvents, ammonia and/or alcohol.
Make sure to dry the surfaces completely after washing.

Cover cloth

Elasticised technical textile, waterproof, developed to protect furniture from weather when not in use.
If condensation forms under the cloth, it will not damage product quality.
Wash the cloth according to the instructions printed on the underside of the cloth and let dry completely in the open air before storing in a closed place in order to prevent mould from forming.
When the product is no longer used, do not abandon it, but take it to a suitable public waste collection facility.
Always remember to be careful not to use the product improperly, considering its designated functions.

End of life instructions

Designer

Monica Armani

Born in Trento, Italy, daughter of an architect, Monica Armani’s own study in architecture evolved into a distinctly disciplined approach to her design process: Design in Molecules.

Years of international experience has systematically identified these molecules, and the success of every project lies in their disciplined application. Monica Armani designs collections of objects and accessories for Italian and international companies.

Her collections have become best sellers and references in the sector.