Product identity

Product Codes

Armchair

CR75F

CR75R

Warnings

Keep for reference: read carefully.

Always remember to be careful not to use the product improperly, considering its designated functions.

When the product is no longer used, do not abandon it, but take it to a suitable public waste collection facility.

The seat structure is made completely in solid wood. Any signs in the joint areas should be considered as intrinsic characteristics of wood as a "living" material. This phenomenon does not compromise the product structure seal in any way.

This product sheet complies with the legal obligations pursuant to the "Consumer Code" Decree n. 206 dated 6/9/2005 and the "Actuation Regulation" Decree n. 101 dated 8/2/1997.

Materials

Frame
solid wood

Spacers
anodized aluminium

Ferrules
thermoplastic material

Cover
thick leather

Maintenance

Thick leather

We also recommend occasionally wiping surfaces with a cloth that has been soaked in warm water and well wrung out.
Any stains or liquids should be removed immediately using a moist, absorbent cloth and plain soap, if necessary.
Any stains or liquids should be removed immediately using a moist, absorbent cloth and plain soap, if necessary.
Never apply excessive pressure during cleaning.

Wood - Painting

For weekly maintenance, dust the surface with a dry cloth.
For dried dirt, use a well-squeezed out cloth, damp with warm water.
For greasy or oily dirt, use a damp sponge and dish washing detergent, and then wipe with a well-squeezed out cloth damp with warm water.
Warning! Apply the detergent directly on the damp sponge, and never on directly on the furniture.
Do not exert excessive pressure and always follow the grain on wood furniture.
Note that if you press or rub too hard, surfaces can become 'polished'.
Avoid using abrasives and products containing solvents, ammonia and/or alcohol.
Make sure to dry the surfaces completely after washing.

Aluminium

We advise using normal commercial products for cleaning delicate surfaces and/or warm water and neutral soap.
Never use abrasives or products containing solvents, ammonia and/or alcohol.
Make sure to dry the surfaces completely after washing.

End of life instructions

Remove the cover and take it to the non-recyclable waste area.

Remove the screws (steel), spacers and lower edges (aluminium) and take them to the area reserved for metal.

Take the frame to the area reserved for wood.

Remove the ferrules and take them to the area reserved for plastic materials.

Designer

Foster+Partners Industrial Design

The art, craft, and science of making has been at the root of Foster + Partners Industrial Design for decades.

Founded by Lord Foster, today the studio develops and delivers ideas-led products at every scale, from tables to turbines, in conjunction with manufacturers, craftspeople, and startups.

Working within an integrated design practice – collaboration is at the heart of Foster + Partners Industrial Design’s ethos– and every product is shaped by a wealth of experiences and global expertise. The studio is driven by principles of sustainability, combining rigorous research with a ‘design by making’ ethos. All projects are advanced through prototyping and making as an iterative approach – refining designs through trial and error, digital modelling, and physical craftsmanship.