Cordoba Outdoor

Product Codes

Armchair

OCR75

Cover Cloth

OCR75F

Warnings

Keep for reference: read carefully.

Always remember to be careful not to use the product improperly, considering its designated functions.

When the product is no longer used, do not abandon it, but take it to a suitable public waste collection facility.

Do not place the product in overly damp environments (e.g. saunas) and in direct contact with water (e.g. sea water, chlorinated water, snow).

Do not immerse in tanks and swimming pools, and do not place at the water’s edge.

Oil stains and suncare lotions must be immediately cleaned.

If the products are placed outdoor and not used for a period of time, it is necessary to protect them with their specifically designed water-proof cover to prevent damage. Before covering, ensure that the product is sufficiently dry in order to prevent degradation/deterioration.

Keep out of reach of children in order to prevent entanglement and suffocation.

Do not cover the furnishing when someone is still sitting.

This product sheet complies with the legal obligations pursuant to the "Consumer Code" Decree n. 206 dated 6/9/2005 and the "Actuation Regulation" Decree n. 101 dated 8/2/1997.

Materials

Frame
solid wood

Spacers
stainless steel

Ferrules
thermoplastic material

Waterproof cover cloth
PES fabric coated on one side in PU

Cover
fabric Laguna or Lamar

Maintenance

Cover

For home washing of covers, follow the symbols on the technical sheet that came with the product.
Periodically adjust the Velcro fasteners to remove folds and creases due to normal use of the product.
If there are no Velcro fasteners, smooth the cover manually from the inside towards the outside.
For ordinary cleaning, dust with a soft dry cotton cloth.
If liquids should accidentally fall on the surface, remove them immediately and dry with paper towels.
The surface can then be cleaned with a white cotton or microfibre cloth, slightly damp with water and neutral soap, and then dried in a well-ventilated place.
In case of stains, act immediately to blot the stain with a clean white cloth and, if necessary, remove the dirt with a spoon or knife, using the flat part horizontally and being very careful to not ruin the cover.
Dab the stain from the outer edges inward to avoid rings.
All actions must be done with circular movements, without exerting excessive mechanical pressure.
Our Stores and dealers sell the specific 'Kit for leather maintenance and cleaning' by B&B Italia (code SETPN), which contains products suitable for the protection and cleaning of your leather product.

Teakwood

Teakwood comes from various tectona plants that are common in tropical countries. As a result of its strong resistance to humidity and of its internal content of oily substances, it is considered a very precious wood type especially for outdoor environments. It must be said that wood is a living material that reacts to external agents; hence, it is normal and natural to note a variation in the shade of colour as time goes by. The change in colour over time is not a defect. On the contrary, it is a natural characteristic of this wood that lives and reacts to the outside environment with an aging/oxidation process which does not alter the structural integrity of the product.

For ordinary maintenance, we advise using a slightly abrasive sponge with neutral soap.
Avoid using products that contain solvents and/or alcohol.
To help maintain the original colour over time, waxes are available in stores. Always be sure to follow the directions that come with the product that you purchase.
However, it is always advisable to protect the product from extreme temperatures that can cause cracks to form in the wood.
Direct contact with rain can cause the release of the oily resin contained naturally in the wood, which generates pigmented halos on any surface that they come in contact with. In this case, it is advisable to remove the substance with a normal degreasing detergent.
Moreover, please note that, being in direct contact with the frame, particularly light-coloured cushions are more subject to rings forming.
Our Stores and dealers sell the specific 'Kit for teakwood maintenance and cleaning” by B&B Italia (code K_TKN), which contains products suitable for the protection and cleaning of your teakwood product.

Stainless steel

Stainless steel requires periodic cleaning with a solution of warm water and neutral soap, and then rinsing with plenty of water and drying carefully with a cloth or paper towels to avoid stains caused by hard water deposits.
For more specific cleaning, there are products available in stores that were specifically designed for stainless steel surfaces.
Never use solvents and abrasive detergents, chlorides, hydrochloric acid, bleaches with a hypochlorous base or strong acids, products for cleaning silver, abrasive sponges or scrapers. Avoid contact with very hot objects.
Warning! If this simple maintenance is not done, pitting can occur - a condition of ugly rust dots that can be removed with specific degreasing products.

Cover cloth

Elasticised technical textile, waterproof, developed to protect furniture from weather when not in use.
If condensation forms under the cloth, it will not damage product quality.
Wash the cloth according to the instructions printed on the underside of the cloth and let dry completely in the open air before storing in a closed place in order to prevent mould from forming.
When the product is no longer used, do not abandon it, but take it to a suitable public waste collection facility.
Always remember to be careful not to use the product improperly, considering its designated functions.

End of life instructions

Designer

Foster+Partners Industrial Design

The art, craft, and science of making has been at the root of Foster + Partners Industrial Design for decades.

Founded by Lord Foster, today the studio develops and delivers ideas-led products at every scale, from tables to turbines, in conjunction with manufacturers, craftspeople, and startups.

Working within an integrated design practice – collaboration is at the heart of Foster + Partners Industrial Design’s ethos– and every product is shaped by a wealth of experiences and global expertise. The studio is driven by principles of sustainability, combining rigorous research with a ‘design by making’ ethos. All projects are advanced through prototyping and making as an iterative approach – refining designs through trial and error, digital modelling, and physical craftsmanship.