NIGHT AREA STORAGE UNITS

Backstage - Backstage '18

Antonio Citterio

Warnings

Keep for reference: read carefully.

Always remember to be careful not to use the product improperly, considering its designated functions.

When the product is no longer used, do not abandon it, but take it to a suitable public waste collection facility.

This product sheet complies with the legal obligations pursuant to the "Consumer Code" Decree n. 206 dated 6/9/2005 and the "Actuation Regulation" Decree n. 101 dated 8/2/1997.

Materials

Side, top, back structure, wardrobe base and internal boiserie panel of the walk-in wardrobe
melamine faced panel in refined wood particles

Skirting frame structure
metal profiles

Swinging-sliding door/Pocket door
honeycomb panel with double tensioner doors inserted inside the frame

Hinged door, closing panel, finish side, boiserie pane
panel in wood particles

Upright
extruded aluminium

Opening mechanism and profiles
extruded aluminium and steel

Shelf
panel in refined wood particles, melamine-faced, lacquered or covered in bonded leather

Drawer structure
panel in wood particles, lacquered wood fibre panel, drawers mounted on total extraction runners with shock absorbers, trinket tray top with insert in bonded leather

Drawer handle
aluminium with insert in bonded leather

Walk-in wardrobe container structure
panel in wood particles

Walk-in wardrobe container hinged door
panel in refined wood particles, lacquered or covered in bonded leather

Clothes rail
extruded aluminium with supports in die-cast Zamak

Hanger holder
shell in plastic and hook in metal

Grid for shirts
panel in wood particles

Internal drawer spacers
bonded leather

Structure with extractable tray
top in tempered smoky glass, HPL stratified laminate panel with aluminium drawer with melamine bottom

Internal divider extractable tray/Accessorised tray
solid wood covered in bonded leather

Internal tray for drawers
multi-layered wood covered in bonded leather

Belt holder
HPL stratified laminate covered in bonded leather and hooks in aluminium

Trinket tray
HPL stratified laminate and wood fibre panel covered in bonded leather

Jewellery box
solid wood and wood fibre panel with ring compartment in bonded leather

Adjustable mirror
extruded aluminium with wood particle panel melamine and natural mirror with safety film

Fixed mirror
extruded aluminium and natural mirror with safety film

Various accessories
beech

LED lighting system
Strip LED 24V DC 4000K

EU/US power supply unit
input voltage 110V-120V/220V-240V 50Hz, output voltage 24V DC, maximum wattage 60W/120W

Proximity sensor switch radio-controlled from a central unit
voltage 24V 50HZ

Maintenance

Wood - Painting

For weekly maintenance, dust the surface with a dry cloth.
For dried dirt, use a well-squeezed out cloth, damp with warm water.
For greasy or oily dirt, use a damp sponge and dish washing detergent, and then wipe with a well-squeezed out cloth damp with warm water.
Warning! Apply the detergent directly on the damp sponge, and never on directly on the furniture.
Do not exert excessive pressure and always follow the grain on wood furniture.
Note that if you press or rub too hard, surfaces can become 'polished'.
Avoid using abrasives and products containing solvents, ammonia and/or alcohol.
Make sure to dry the surfaces completely after washing.

Mirror

Dust the entire surface carefully to remove any dust (use a soft white cloth).
We advise using normal commercial products for cleaning delicate surfaces.
Rub the surface to be cleaned gently without concentrating just on the area requiring attention: start instead with a larger section and gradually work your way towards the area in the middle.
That way, you will avoid rings or scratches forming, which may be produced if you apply too much pressure to the surface.
Never use solvents or abrasive detergents.

Cover

For home washing of covers, follow the symbols on the technical sheet that came with the product.
Periodically adjust the Velcro fasteners to remove folds and creases due to normal use of the product.
If there are no Velcro fasteners, smooth the cover manually from the inside towards the outside.
For ordinary cleaning, dust with a soft dry cotton cloth.
If liquids should accidentally fall on the surface, remove them immediately and dry with paper towels.
The surface can then be cleaned with a white cotton or microfibre cloth, slightly damp with water and neutral soap, and then dried in a well-ventilated place.
In case of stains, act immediately to blot the stain with a clean white cloth and, if necessary, remove the dirt with a spoon or knife, using the flat part horizontally and being very careful to not ruin the cover.
Dab the stain from the outer edges inward to avoid rings.
All actions must be done with circular movements, without exerting excessive mechanical pressure.
Our Stores and dealers sell the specific 'Kit for leather maintenance and cleaning' by B&B Italia (code SETPN), which contains products suitable for the protection and cleaning of your leather product.

Aluminium - Steel

We advise using normal commercial products for cleaning delicate surfaces and/or warm water and neutral soap.
Never use abrasives or products containing solvents, ammonia and/or alcohol.
Make sure to dry the surfaces completely after washing.

Led

The luminaire is classified as EEE (electrical and electronic equipment) and must be disposed of in compliance with regulations.
Individual LED in the bar cannot be replaced. If one malfunctions, it is necessary to replace the entire bar.
Clean the luminaire only when disconnected from the power mains.
Clean only with a dry cloth.

Instructions

Download PDF

Warranty

B&B Italia guarantees the cover, the feet, the materials, accessories and mechanisms making up the product for 26 months from the date of manufacture (as stated on the "Product data sheet - Guarantee") against any manufacturing defect including lacquering and frame of non-upholstery products. In any case, it has to be pointed out that the materials, even if adequately lightfast to sunlight and artificial light, may be subject to alterations over time due to prolonged exposure to light, washing and ordinary mechanical wear. The guarantee refers to original product manufacturing defects and consists of replacement or repair, free of charge, of the unusable or defective parts, ascertained and acknowledged as such by B&B Italia or its representative. The guarantee does not cover anomalies and spoilage due to:

normal wear over time;
illegitimate use;
inappropriate care with treatments not complying with the enclosed instructions.

Moreover, the guarantee does not cover defects of non-compliance that cannot be attributed to B&B Italia (e.g. incorrect assembling of the product and/or assembling not complying with the assembling instructions). This provision also applies to those products that are designed to be installed directly by the consumer, in the presence of correct and exhaustive instructions. The guarantee shall be forfeited if the products are unassembled, modified or repaired by anyone who is not authorised by B&B Italia. Any intervention made in guarantee does not interrupt the course thereof. To exercise the rights deriving from this guarantee, the relevant "Product data sheet - Guarantee" shall be forwarded to B&B Italia (to the address stated below) bearing the date of manufacture; said "Product data sheet - Guarantee" shall therefore be retained for the entire period during which the guarantee is valid. B&B Italia S.p.A. 22060 Novedrate (CO) Italy, Strada Provinciale 32 n.15 For the purpose of better preserving the product over time it is recommended:

not to jump or sit on the overhanging parts, the backrests and the armrests;
not to drag the product, lifting it instead, so as to avoid damages to the parts resting on the floor;
to protect the product against shocks and contact with pointed and sharp elements and liquids or detergents containing corrosive agents;
to follow the care instructions listed in the specific section of the material enclosed with the product.

Designer

Antonio Citterio

Antonio Citterio was born in Meda (Milano) in 1950, and started his design office in 1972, graduating in architecture at the Politecnico di Milano in 1975. Between 1987 and 1996 he worked in association with Terry Dwan and, together, they designed buildings in Europe and Japan.

In 2000, with Patricia Viel, he founded a practice for architecture and interior design, developing international complex long-term projects, at all scales and in synergy with a qualified network of specialist consultants. The studio has today taken the name of "Antonio Citterio Patricia Viel". Antonio Citterio currently works in the industrial design sector with numerous Italian and foreign companies. In 1987 and in 1994 he was awarded the Compasso d’Oro-ADI. From 2006 to 2016 he has been professor of Architectural Design at the Mendrisio Academy of Architecture (Switzerland). In 2008 he was honoured by the Royal Society for the Encouragement of Arts, Manufactures & Commerce of London, which gave him the title of “Royal Designer for Industry”.

Antonio Citterio is art director of Maxalto, Arclinea and Azucena.