Abaco
Ronan Bouroullec
Product Codes
| TAB240 | TAB305N_B | TAB370N_B |
| TAB240N_B | TAB305R_B | TAB370R_B |
| TAB240R_B | TAB305V | TAB500 |
| TAB240V | TAB305V_B | TAB500N_B |
| TAB240V_B | TAB370 | TAB500R_B |
| TAB305 |
Repairability and other warnings
Reparability information
To help preserve the product over time and extend its useful life, B&B Italia supports, where technically feasible, the maintenance, repair and replacement of product components through its Customer Service department and network of authorised dealers.
How to Request Assistance
For information about product repairability, the availability of spare parts, the cost of any required work or the applicable service procedures, please contact B&B Italia Customer Service. Full contact details, including telephone number and email address, are available in the «Contacts» section of the B&B Italia website.
Alternatively, you may contact an authorised B&B Italia dealer. The list of authorised dealers is available in the «Store Locator» section.
Each request will be assessed on a case-by-case basis to identify the most appropriate solution, taking into account the specific characteristics and condition of the product.
Maintenance
Proper maintenance helps preserve the product’s quality, functionality and appearance over time.
Please follow the use and maintenance instructions provided by B&B Italia. Any maintenance or repair work must be carried out exclusively through service channels authorised by B&B Italia.
- Always remember to be careful not to use the product improperly, considering its designated functions.
- When the product is no longer used, do not abandon it, but take it to a suitable public waste collection facility.
- To maintain the quality and finish of the surface, it is advisable to use protective articles (e.g. placemats or trivets) under objects that could scratched it.
This product sheet complies with the legal obligations pursuant to the "Consumer Code" Decree n. 206 dated 6/9/2005 and the "Actuation Regulation" Decree n. 101 dated 8/2/1997.
Materials
veneered wood particles panel or tempered smoky glass
Legs
solid wood or cement
Support crosspiece
veneered multi-layered wood
Adjustable feet
plastic material and steel
Maintenance
Wood - Painting
- For weekly maintenance, dust the surface with a dry cloth.
- For dried dirt, use a well-squeezed out cloth, damp with warm water.
- For greasy or oily dirt, use a damp sponge and dish washing detergent, and then wipe with a well-squeezed out cloth damp with warm water.
- Warning! Apply the detergent directly on the damp sponge, and never on directly on the furniture.
- Do not exert excessive pressure and always follow the grain on wood furniture.
- Note that if you press or rub too hard, surfaces can become 'polished'.
- Avoid using abrasives and products containing solvents, ammonia and/or alcohol.
- Make sure to dry the surfaces completely after washing.
Glass
- Dust the entire surface carefully to remove any dust (use a soft white cloth).
- We advise using normal commercial products for cleaning delicate surfaces.
- Rub the surface to be cleaned gently without concentrating just on the area requiring attention: start instead with a larger section and gradually work your way towards the area in the middle.
- That way, you will avoid rings or scratches forming, which may be produced if you apply too much pressure to the surface.
- Never use solvents or abrasive detergents.
Warranty
Designer
