Tobi-Ishi striped marble
Edward Barber & Jay Osgerby
Product Codes
Table
| T160M_SE |
Warnings
- Keep for reference: read carefully.
- Always remember to be careful not to use the product improperly, considering its designated functions.
- When the product is no longer used, do not abandon it, but take it to a suitable public waste collection facility.
- To maintain the quality and finish of the surface, it is advisable to use protective articles (e.g. placemats or trivets) under objects that could scratched it.
- Assemble the table only after deciding the position where it will be used.
- Moving it will require it to be slightly lifted from the ground by at least two people without oblique rotation of the table top and without using the legs as a lever.
- The assembled table must always be handled with the top in a horizontal position.
- Considering the product particular aesthetics and the characteristics of the materials that compose it, the top could show a slight bending of about 1% of its length.
This product sheet complies with the legal obligations pursuant to the "Consumer Code" Decree n. 206 dated 6/9/2005 and the "Actuation Regulation" Decree n. 101 dated 8/2/1997.
Materials
Top and legs
marble (matt polyester finish)
Coupling plate
stainless steel
Ferrules
felt
marble (matt polyester finish)
Coupling plate
stainless steel
Ferrules
felt
Maintenance
Marble (polyester)
- For normal maintenance, we advise using a microfibre cloth damp with warm water.
- In case of stains caused by liquids and/or greasy substances, blot/remove the stain immediately and then wipe the entire surface with a cloth damp with warm water.
- Never use solvents or abrasive detergents, and always avoid contact with very hot objects (e.g. flatware, coffee pots, teapots).
- To maintain the quality and finish of the surface over time, it is advisable to use protection on the surface (e.g. placemats or trivets) under objects that could scratch it.
- Warning! Marbles with polyester can turn yellow if exposed to constant sunlight and/or high temperatures and humidity.
Instructions
Warranty
B&B Italia guarantees the cover, the feet, the materials, accessories and mechanisms making up the product for 26 months from the date of manufacture (as stated on the "Product data sheet - Guarantee") against any manufacturing defect including lacquering and frame of non-upholstery products. In any case, it has to be pointed out that the materials, even if adequately lightfast to sunlight and artificial light, may be subject to alterations over time due to prolonged exposure to light, washing and ordinary mechanical wear. The guarantee refers to original product manufacturing defects and consists of replacement or repair, free of charge, of the unusable or defective parts, ascertained and acknowledged as such by B&B Italia or its representative. The guarantee does not cover anomalies and spoilage due to:
Moreover, the guarantee does not cover defects of non-compliance that cannot be attributed to B&B Italia (e.g. incorrect assembling of the product and/or assembling not complying with the assembling instructions). This provision also applies to those products that are designed to be installed directly by the consumer, in the presence of correct and exhaustive instructions. The guarantee shall be forfeited if the products are unassembled, modified or repaired by anyone who is not authorised by B&B Italia. Any intervention made in guarantee does not interrupt the course thereof. To exercise the rights deriving from this guarantee, the relevant "Product data sheet - Guarantee" shall be forwarded to B&B Italia (to the address stated below) bearing the date of manufacture; said "Product data sheet - Guarantee" shall therefore be retained for the entire period during which the guarantee is valid. B&B Italia S.p.A. 22060 Novedrate (CO) Italy, Strada Provinciale 32 n.15 For the purpose of better preserving the product over time it is recommended:
- normal wear over time;
- illegitimate use;
- inappropriate care with treatments not complying with the enclosed instructions.
Moreover, the guarantee does not cover defects of non-compliance that cannot be attributed to B&B Italia (e.g. incorrect assembling of the product and/or assembling not complying with the assembling instructions). This provision also applies to those products that are designed to be installed directly by the consumer, in the presence of correct and exhaustive instructions. The guarantee shall be forfeited if the products are unassembled, modified or repaired by anyone who is not authorised by B&B Italia. Any intervention made in guarantee does not interrupt the course thereof. To exercise the rights deriving from this guarantee, the relevant "Product data sheet - Guarantee" shall be forwarded to B&B Italia (to the address stated below) bearing the date of manufacture; said "Product data sheet - Guarantee" shall therefore be retained for the entire period during which the guarantee is valid. B&B Italia S.p.A. 22060 Novedrate (CO) Italy, Strada Provinciale 32 n.15 For the purpose of better preserving the product over time it is recommended:
- not to jump or sit on the overhanging parts, the backrests and the armrests;
- not to drag the product, lifting it instead, so as to avoid damages to the parts resting on the floor;
- to protect the product against shocks and contact with pointed and sharp elements and liquids or detergents containing corrosive agents;
- to follow the care instructions listed in the specific section of the material enclosed with the product.
Designer
Edward Barber & Jay Osgerby
Edward Barber and Jay Osgerby founded their East London studio in 1996, after studying architecture together at the Royal College of Art. Their approach is characterised by its emphasis on experimentation and innovation and an exploratory attitude to materiality and colour.
From these areas of focus emerge solutions that reflect the close relationship of their work with industrial processes and new technologies, but also its affinities with fine art. The strength of Barber and Osgerby’s creative partnership has led to collaborations with some of the world’s most progressive companies and a diversity of output that encompasses architecture, interiors, sculpture, product and exhibition design. Amongst many professional accolades, Barber and Osgerby received the Jerwood prize in 2004 and in 2007 were awarded the status of “Royal Designers for Industry”. In 2013 they were appointed to the Order of the British Empire, for services to the design industry.
Examples of their work are held in the permanent collections of major museums around the world, such as the Design Museum in London and the Metropolitan Museum of Art in New York, to name a few. In 2001 Barber and Osgerby founded Universal to function in parallel with their primary studio. Focused on the fields of architecture, interiors and exhibition design, Universal is now recognised as one of the world’s most innovative creative design consultancies. In 2012 they launched Map, a strategy-based industrial design consultancy, Map.
From these areas of focus emerge solutions that reflect the close relationship of their work with industrial processes and new technologies, but also its affinities with fine art. The strength of Barber and Osgerby’s creative partnership has led to collaborations with some of the world’s most progressive companies and a diversity of output that encompasses architecture, interiors, sculpture, product and exhibition design. Amongst many professional accolades, Barber and Osgerby received the Jerwood prize in 2004 and in 2007 were awarded the status of “Royal Designers for Industry”. In 2013 they were appointed to the Order of the British Empire, for services to the design industry.
Examples of their work are held in the permanent collections of major museums around the world, such as the Design Museum in London and the Metropolitan Museum of Art in New York, to name a few. In 2001 Barber and Osgerby founded Universal to function in parallel with their primary studio. Focused on the fields of architecture, interiors and exhibition design, Universal is now recognised as one of the world’s most innovative creative design consultancies. In 2012 they launched Map, a strategy-based industrial design consultancy, Map.