Pablo Outdoor

Product Codes

Armchair

PBL80

PBL82L

Cushion

PBL80SCW

PBL80SEW

PBL82LSEW

Cover Cloth

PBL80F

PBL82LF

Warnings

Keep for reference: read carefully.

Always remember to be careful not to use the product improperly, considering its designated functions.

When the product is no longer used, do not abandon it, but take it to a suitable public waste collection facility.

Do not place the product in overly damp environments (e.g. saunas) and in direct contact with water (e.g. sea water, chlorinated water, snow).

Do not immerse in tanks and swimming pools, and do not place at the water’s edge.

Oil stains and suncare lotions must be immediately cleaned.

If the products are placed outdoor and not used for a period of time, it is necessary to protect them with their specifically designed water-proof cover to prevent damage. Before covering, ensure that the product is sufficiently dry in order to prevent degradation/deterioration.

Keep out of reach of children in order to prevent entanglement and suffocation.

Do not cover the furnishing when someone is still sitting.

This product sheet complies with the legal obligations pursuant to the "Consumer Code" Decree n. 206 dated 6/9/2005 and the "Actuation Regulation" Decree n. 101 dated 8/2/1997.

Materials

Frame
solid wood

Upholstery
shaped polyurethane of different density, cover in water repellent polyester fibre

Back support
stainless steel tubular covered in fabric

Seat slats
polypropylene reinforced with glass fibre

Ferrules
thermoplastic material

Waterproof cover cloth
PES fabric coated on one side in PU

Cover
fabric in limited categories

Maintenance

Cover

For home washing of covers, follow the symbols on the technical sheet that came with the product.
Periodically adjust the Velcro fasteners to remove folds and creases due to normal use of the product.
If there are no Velcro fasteners, smooth the cover manually from the inside towards the outside.
For ordinary cleaning, dust with a soft dry cotton cloth.
If liquids should accidentally fall on the surface, remove them immediately and dry with paper towels.
The surface can then be cleaned with a white cotton or microfibre cloth, slightly damp with water and neutral soap, and then dried in a well-ventilated place.
In case of stains, act immediately to blot the stain with a clean white cloth and, if necessary, remove the dirt with a spoon or knife, using the flat part horizontally and being very careful to not ruin the cover.
Dab the stain from the outer edges inward to avoid rings.
All actions must be done with circular movements, without exerting excessive mechanical pressure.
Our Stores and dealers sell the specific 'Kit for leather maintenance and cleaning' by B&B Italia (code SETPN), which contains products suitable for the protection and cleaning of your leather product.

Upholstery

Manually punch the cushions on all sides, fluff them up to air the padding and restore the original volume.
For best results, remove the cushion covers regularly, knead and fluff up the padding, and air it possibly outdoors before slipping on the cover once again.
If possible, periodically change the position of the most used cushions with the less used ones.

Teakwood

Teakwood comes from various tectona plants that are common in tropical countries. As a result of its strong resistance to humidity and of its internal content of oily substances, it is considered a very precious wood type especially for outdoor environments. It must be said that wood is a living material that reacts to external agents; hence, it is normal and natural to note a variation in the shade of colour as time goes by. The change in colour over time is not a defect. On the contrary, it is a natural characteristic of this wood that lives and reacts to the outside environment with an aging/oxidation process which does not alter the structural integrity of the product.

For ordinary maintenance, we advise using a slightly abrasive sponge with neutral soap.
Avoid using products that contain solvents and/or alcohol.
To help maintain the original colour over time, waxes are available in stores. Always be sure to follow the directions that come with the product that you purchase.
However, it is always advisable to protect the product from extreme temperatures that can cause cracks to form in the wood.
Direct contact with rain can cause the release of the oily resin contained naturally in the wood, which generates pigmented halos on any surface that they come in contact with. In this case, it is advisable to remove the substance with a normal degreasing detergent.
Moreover, please note that, being in direct contact with the frame, particularly light-coloured cushions are more subject to rings forming.
Our Stores and dealers sell the specific 'Kit for teakwood maintenance and cleaning” by B&B Italia (code K_TKN), which contains products suitable for the protection and cleaning of your teakwood product.

Cover cloth

Elasticised technical textile, waterproof, developed to protect furniture from weather when not in use.
If condensation forms under the cloth, it will not damage product quality.
Wash the cloth according to the instructions printed on the underside of the cloth and let dry completely in the open air before storing in a closed place in order to prevent mould from forming.
When the product is no longer used, do not abandon it, but take it to a suitable public waste collection facility.
Always remember to be careful not to use the product improperly, considering its designated functions.

Instructions

Download PDF

End of life instructions

01. Remove the cover and, depending on its composition, take it to the area reserved for undifferentiated waste or plastic material.

02. Remove the upholstered cover and take it to a place that handles polyester disposal.

03. Remove the upholstery from the back cushions and take it to a place that handles polyester disposal.

04. Remove the polyurethane section and take it to the undifferentiated waste area.

05. Remove the screws from the back using an Allen key, remove the cover, and take it to the undifferentiated waste area.

06. Take the screws and steel bars of the back to the area reserved for metal.

07. Remove the steel lower edges from the rear legs and take them to the area reserved for metal.

08. Remove the screws holding the slats with a Phillips-head screwdriver and take them to the area reserved for metal.

09. Take the slats to the undifferentiated waste area.

10. Remove the caps and take them to the area reserved for plastic material.

11. Unscrew the central leg and/or stainless steel plates and take them to the area reserved for metal.

12. Remove the structure and take it to the area reserved for wood.

Designer

Vincent Van Duysen

Lucas School of Architecture, Ghent, he worked with Aldo Cibic in Milan, followed by a collaboration with Jean De Meulder in Antwerp, Belgium. In 1989, he established Vincent Van Duysen Architects. Today, the firm has grown into a team of about 40 collaborators with work ranging from product design and creative direction to hospitality-led projects, alongside commercial and residential architecture, in Belgium and across Europe, the Middle East, Asia, and the United States. From the outset, Van Duysen has defined a close relationship between architecture, interior, and product design, allowing subtle transitions between these disciplines to shape his projects and guide a constant search for essence. Through pure, tactile materials and a deep respect for context and tradition, his work results in clean, timeless spaces that prioritize sensory experience, functionality, durability, comfort, and an aesthetic that deliberately avoids fleeting trends. Over the years, he has engaged in long standing collaborations with brands such as Molteni&C, Flos, Kettal, Kvadrat, Mutina, Serax, Sutherland, Zanotta, Fantini, B&B Italia, Zara Home, and more. In 2016, Van Duysen was appointed Creative Director of the Italian brand Molteni&C. In this role, he has overseen the brand’s creative vision across multiple scales, coordinating architecture, interiors, product development and communication, and contributing to the definition of a coherent and internationally recognizable identity. During his career, Van Duysen has received multiple awards among which the Flemish Culture Prize for Design, Belgian Designer of the Year and the Henry van de Velde Lifetime Achievement Award, and an EDIDA for Best Interior Designer of the Year. In 2021, the Winery VV has also been nominated and shortlisted for the Mies Van Der Rohe Award. His name has been featured on Architectural Digest’s AD100 survey and the Elle Decor A-List on multiple occasions. For many years, Van Duysen’s work has been appearing on a number of prestigious international publications. Starting from 1994, his projects and realizations have also been featured in different monographs among which those edited by renowned publishing house Thames & Hudson, with a third one to be released in Fall 2026. In 2024, “Vincent Van Duysen: Private”, a new personal look into the architect’s residences, has been published by Rizzoli with photography by François Halard.