Product identity

Product Codes

Central Element

NH136C

NH95C

Terminal Element

NH136TD	NH95TD	NH95TS
NH136TS

Corner Element

NH136AD

NH136AS

NH95A

Chaise Longue

NH136L

NH136LD

NH136LS

Ottoman

NH136P

NH95P

NH95PQ

Service Element

TNH32

TNH32_L

Cushion

NH136AD_2SC	NH60_60C	NH95SC
NH136AS_2SC	NH60_SB	NH95SE
NH136SC	NH95A_2SC	NH95_136SE
NH136SE

Cover Cloth

NH136AD_F	NH136L_F	NH95C_F
NH136AS_F	NH136P_F	NH95PQ_F
NH136C_F	NH136TD_F	NH95P_F
NH136LD_F	NH136TS_F	NH95TD_F
NH136LS_F	NH95A_F	NH95TS_F

Section

NH1P	NH2P	NH3P
NH1P_L	NH2P_L	NH3P_L

Warnings

Keep for reference: read carefully.

Always remember to be careful not to use the product improperly, considering its designated functions.

When the product is no longer used, do not abandon it, but take it to a suitable public waste collection facility.

Do not place the product in overly damp environments (e.g. saunas) and in direct contact with water (e.g. sea water, chlorinated water, snow).

Do not immerse in tanks and swimming pools, and do not place at the water’s edge.

Oil stains and suncare lotions must be immediately cleaned.

Due to prolonged exposure to direct sun light the surface may become hot to touch. Special attention required.

To maintain the quality and finish of the surface, it is advisable to use protective articles (e.g. placemats or trivets) under objects that could scratched it.

If the products are placed outdoor and not used for a period of time, it is necessary to protect them with their specifically designed water-proof cover to prevent damage. Before covering, ensure that the product is sufficiently dry in order to prevent degradation/deterioration.
Keep out of reach of children in order to prevent entanglement and suffocation.
Do not cover the furnishing when someone is still sitting.

This product sheet complies with the legal obligations pursuant to the "Consumer Code" Decree n. 206 dated 6/9/2005 and the "Actuation Regulation" Decree n. 101 dated 8/2/1997.

Materials

Frame
die-cast aluminium and extrusions

Back and seat upholstery
shaped polyurethane, biodegradable polyester fibre recycled from PET, cover in water repellent polyester fibre

Cushion upholstery (NH60_60C)
biodegradable polyester fibre recycled from PET, cover in water repellent polyester fibre

Armrest support (NH60_SB)
shaped polyurethane, cover in water repellent polyester fibre

Top section and service element
Serpentine stone or solid wood

Spacers
plastic material

Ferrules
thermoplastic elastomer

Waterproof cover cloth
PES fabric coated on one side in PU

Cover
fabric in limited categories

Maintenance

Cover

For home washing of covers, follow the symbols on the technical sheet that came with the product.
Periodically adjust the Velcro fasteners to remove folds and creases due to normal use of the product.
If there are no Velcro fasteners, smooth the cover manually from the inside towards the outside.
For ordinary cleaning, dust with a soft dry cotton cloth.
If liquids should accidentally fall on the surface, remove them immediately and dry with paper towels.
The surface can then be cleaned with a white cotton or microfibre cloth, slightly damp with water and neutral soap, and then dried in a well-ventilated place.
In case of stains, act immediately to blot the stain with a clean white cloth and, if necessary, remove the dirt with a spoon or knife, using the flat part horizontally and being very careful to not ruin the cover.
Dab the stain from the outer edges inward to avoid rings.
All actions must be done with circular movements, without exerting excessive mechanical pressure.
Our Stores and dealers sell the specific 'Kit for leather maintenance and cleaning' by B&B Italia (code SETPN), which contains products suitable for the protection and cleaning of your leather product.

Upholstery

Manually punch the cushions on all sides, fluff them up to air the padding and restore the original volume.
For best results, remove the cushion covers regularly, knead and fluff up the padding, and air it possibly outdoors before slipping on the cover once again.
If possible, periodically change the position of the most used cushions with the less used ones.

Aluminium

We advise using normal commercial products for cleaning delicate surfaces and/or warm water and neutral soap.
Never use abrasives or products containing solvents, ammonia and/or alcohol.
Make sure to dry the surfaces completely after washing.

Teakwood

Teakwood comes from various tectona plants that are common in tropical countries. As a result of its strong resistance to humidity and of its internal content of oily substances, it is considered a very precious wood type especially for outdoor environments. It must be said that wood is a living material that reacts to external agents; hence, it is normal and natural to note a variation in the shade of colour as time goes by. The change in colour over time is not a defect. On the contrary, it is a natural characteristic of this wood that lives and reacts to the outside environment with an aging/oxidation process which does not alter the structural integrity of the product.

For ordinary maintenance, we advise using a slightly abrasive sponge with neutral soap.
Avoid using products that contain solvents and/or alcohol.
To help maintain the original colour over time, waxes are available in stores. Always be sure to follow the directions that come with the product that you purchase.
However, it is always advisable to protect the product from extreme temperatures that can cause cracks to form in the wood.
Direct contact with rain can cause the release of the oily resin contained naturally in the wood, which generates pigmented halos on any surface that they come in contact with. In this case, it is advisable to remove the substance with a normal degreasing detergent.
Moreover, please note that, being in direct contact with the frame, particularly light-coloured cushions are more subject to rings forming.
Our Stores and dealers sell the specific 'Kit for teakwood maintenance and cleaning” by B&B Italia (code K_TKN), which contains products suitable for the protection and cleaning of your teakwood product.

Serpentine stone

For normal maintenance, we advise using a microfibre cloth damp with warm water.
In case of stains caused by liquids and/or greasy substances, blot/remove the stain immediately and then wipe the entire surface with a cloth damp with warm water and neutral detergent. Rinse with water.
Never use solvents and always avoid contact with very hot objects (e.g. flatware, coffee pots, teapots).
Serpentines have by nature a good resistance to water, however, can be deteriorated and stained permanently when coming into contact with substances such as: alcohol, oils, grease, varnishes, inks, creams, paraffin, etc.

Cover cloth

Elasticised technical textile, waterproof, developed to protect furniture from weather when not in use.
If condensation forms under the cloth, it will not damage product quality.
Wash the cloth according to the instructions printed on the underside of the cloth and let dry completely in the open air before storing in a closed place in order to prevent mould from forming.
When the product is no longer used, do not abandon it, but take it to a suitable public waste collection facility.
Always remember to be careful not to use the product improperly, considering its designated functions.

Instructions

Download PDF

End of life instructions

Remove the cushion lining and separate the two sections of padding. Take the polyester part to a place that handles polyester disposal. Dispose of the polyurethane padding and the lining in the unsorted waste of a public recycling centre.
Dispose of the frame in the proper public separate collection facility in the area reserved for metal materials.
Unscrew the top from the frame and transfer it to the correct disposal area: teak tops go in the wood area and stone tops in the building materials area.
Remove the tips and hole covers from the frame and place them in the plastic materials recovery area.
Unscrew the top from the frame and transfer it to the correct disposal area: teak tops go in the wood area and stone tops in the building materials area.
Dispose of the frame in the proper public separate collection facility in the area reserved for metal materials.
Remove the tips from the frame and place them in the plastic materials recovery area.
Dispose of the polyurethane padding and the lining in the unsorted waste of a public recycling centre.
Take the polyester part to a place that handles polyester disposal.
Take the supports to the area reserved for plastic materials.

Warranty

B&B Italia guarantees the cover, the feet, the materials, accessories and mechanisms making up the product for 26 months from the date of manufacture (as stated on the "Product data sheet - Guarantee") against any manufacturing defect including lacquering and frame of non-upholstery products. In any case, it has to be pointed out that the materials, even if adequately lightfast to sunlight and artificial light, may be subject to alterations over time due to prolonged exposure to light, washing and ordinary mechanical wear. The guarantee refers to original product manufacturing defects and consists of replacement or repair, free of charge, of the unusable or defective parts, ascertained and acknowledged as such by B&B Italia or its representative. The guarantee does not cover anomalies and spoilage due to:

normal wear over time;
illegitimate use;
inappropriate care with treatments not complying with the enclosed instructions.

Moreover, the guarantee does not cover defects of non-compliance that cannot be attributed to B&B Italia (e.g. incorrect assembling of the product and/or assembling not complying with the assembling instructions). This provision also applies to those products that are designed to be installed directly by the consumer, in the presence of correct and exhaustive instructions. The guarantee shall be forfeited if the products are unassembled, modified or repaired by anyone who is not authorised by B&B Italia. Any intervention made in guarantee does not interrupt the course thereof. To exercise the rights deriving from this guarantee, the relevant "Product data sheet - Guarantee" shall be forwarded to B&B Italia (to the address stated below) bearing the date of manufacture; said "Product data sheet - Guarantee" shall therefore be retained for the entire period during which the guarantee is valid. B&B Italia S.p.A. 22060 Novedrate (CO) Italy, Strada Provinciale 32 n.15 For the purpose of better preserving the product over time it is recommended:

not to jump or sit on the overhanging parts, the backrests and the armrests;
not to drag the product, lifting it instead, so as to avoid damages to the parts resting on the floor;
to protect the product against shocks and contact with pointed and sharp elements and liquids or detergents containing corrosive agents;
to follow the care instructions listed in the specific section of the material enclosed with the product.

Designer

Piero Lissoni

Piero Lissoni is architect, art director and designer and is recognized as one of the masters of contemporary design. He possesses an almost forty-year history in the development of projects the world over in the fields of architecture, landscape, interior, product and graphic design. He is also art director for Alpi, Boffi, Living Divani, Lualdi, Porro and Sanlorenzo.

Some of the most important architecture and interior projects deserving of mention include the AP House Milan for Audemars Piguet (2024), the new headquarters of Banca Ifis in Rome (2024), the Dorothea Hotel Autograph Collection for Marriott International in Budapest (2023), the AKA hotels in New York and Alexandria, Virginia (2023), the design of The Haven, an exclusive area inside the NCL Norwegian Prima cruise ship (2022), the Shangri-La Shougang Park in Beijing (2021) realized for the 2022 winter Olympics, The Ritz Carlton Residences in Miami Beach (2020), the Grand Park Hotel in Rovinj, Croatia (2019), the restyling of the historic Camparino in Galleria Bar in Milan (2019), The Middle House for the Swire Hotels Group in Shanghai (2018), the residential projects One Paraiso and Grand Paraiso in Miami (2018), The Oberoi Al Zorah Beach Resort Ajman in the UAE (2017), the interiors of a series of yachts for Sanlorenzo (2017 2020), the Conservatorium Hotel in Amsterdam (2012), the renovation of the historic Teatro Nazionale in Milan (2009), in addition to the corporate headquarters for companies such as Boffi, Glas Italia, Fantini, Living Divani and the shipyards of Sanlorenzo in La Spezia and Ameglia.

Piero Lissoni has received a series of international awards, including the Compasso d’Oro Career Award, two Compasso d'Oro ADI, the Good Design Award and the Red Dot Award.