Product identity

Product Codes

Sofa

9HY222

9HY310

Central Element

9HY178C	HY178C	HY266C
9HY266C

Terminal Element

9HY200T_1	HY200T_1	HY200T_2
9HY200T_2

Corner Element

9HY178A_1	HY222A_1	HY222A_2
9HY178A_2

Chaise Longue

HY134L

HY134L_2

HY200L

Bench

9HY178PA

HY178PA

Ottoman

9HY112P	HY134PQ	HY90P
9HY178P	HY178P

Cushion

HY110A_C	HY154S_11SE	HY198D_11SE
HY110B_C	HY154_8SE	HY198S_11SE
HY110D_11SE	HY176D_11SE	HY198_8SE
HY110S_11SE	HY176D_8SE	HY88A_C
HY110_8SE	HY176S_11SE	HY88B_C
HY132D_13SE	HY176S_8SE	HY88_11SE
HY132S_13SE	HY176_11SE	HY88_6SE
HY132_13SE	HY176_6SE	HY88_8SE
HY154D_11SE	HY176_8SE	HY_P

Cover Cloth

HY10_F	HY15_F	HY5_F
HY11_F	HY1_F	HY6_F
HY12_F	HY2_F	HY7_F
HY13_F	HY3_F	HY8_F
HY14_F	HY4_F	HY9_F

Warnings

Keep for reference: read carefully.

Always remember to be careful not to use the product improperly, considering its designated functions.

When the product is no longer used, do not abandon it, but take it to a suitable public waste collection facility.

Do not place the product in overly damp environments (e.g. saunas) and in direct contact with water (e.g. sea water, chlorinated water, snow).

Do not immerse in tanks and swimming pools, and do not place at the water’s edge.

Oil stains and suncare lotions must be immediately cleaned.

If the products are placed outdoor and not used for a period of time, it is necessary to protect them with their specifically designed water-proof cover to prevent damage. Before covering, ensure that the product is sufficiently dry in order to prevent degradation/deterioration.

Keep out of reach of children in order to prevent entanglement and suffocation.

Do not cover the furnishing when someone is still sitting.

This product sheet complies with the legal obligations pursuant to the "Consumer Code" Decree n. 206 dated 6/9/2005 and the "Actuation Regulation" Decree n. 101 dated 8/2/1997.

Materials

Frame
die-cast aluminium and extrusions with polyester powder painting

Upholstery
shaped polyurethane of different density, cover in water repellent polyester fibre

Seat slats
glass fibre

Ferrules
thermoplastic material

Waterproof cover cloth
PES fabric coated on one side in PU

Cover
fabric in limited categories (with profile)

Maintenance

Cover

For home washing of covers, follow the symbols on the technical sheet that came with the product.
Periodically adjust the Velcro fasteners to remove folds and creases due to normal use of the product.
If there are no Velcro fasteners, smooth the cover manually from the inside towards the outside.
For ordinary cleaning, dust with a soft dry cotton cloth.
If liquids should accidentally fall on the surface, remove them immediately and dry with paper towels.
The surface can then be cleaned with a white cotton or microfibre cloth, slightly damp with water and neutral soap, and then dried in a well-ventilated place.
In case of stains, act immediately to blot the stain with a clean white cloth and, if necessary, remove the dirt with a spoon or knife, using the flat part horizontally and being very careful to not ruin the cover.
Dab the stain from the outer edges inward to avoid rings.
All actions must be done with circular movements, without exerting excessive mechanical pressure.
Our Stores and dealers sell the specific 'Kit for leather maintenance and cleaning' by B&B Italia (code SETPN), which contains products suitable for the protection and cleaning of your leather product.

Upholstery

Manually punch the cushions on all sides, fluff them up to air the padding and restore the original volume.
For best results, remove the cushion covers regularly, knead and fluff up the padding, and air it possibly outdoors before slipping on the cover once again.
If possible, periodically change the position of the most used cushions with the less used ones.

Aluminium

We advise using normal commercial products for cleaning delicate surfaces and/or warm water and neutral soap.
Never use abrasives or products containing solvents, ammonia and/or alcohol.
Make sure to dry the surfaces completely after washing.

Cover cloth

Elasticised technical textile, waterproof, developed to protect furniture from weather when not in use.
If condensation forms under the cloth, it will not damage product quality.
Wash the cloth according to the instructions printed on the underside of the cloth and let dry completely in the open air before storing in a closed place in order to prevent mould from forming.
When the product is no longer used, do not abandon it, but take it to a suitable public waste collection facility.
Always remember to be careful not to use the product improperly, considering its designated functions.

Instructions

Download PDF

Designer

Antonio Citterio

Antonio Citterio was born in Meda (Milano) in 1950, and started his design office in 1972, graduating in architecture at the Politecnico di Milano in 1975. Between 1987 and 1996 he worked in association with Terry Dwan and, together, they designed buildings in Europe and Japan.

In 2000, with Patricia Viel, he founded a practice for architecture and interior design, developing international complex long-term projects, at all scales and in synergy with a qualified network of specialist consultants. The studio has today taken the name of "Antonio Citterio Patricia Viel". Antonio Citterio currently works in the industrial design sector with numerous Italian and foreign companies. In 1987 and in 1994 he was awarded the Compasso d’Oro-ADI. From 2006 to 2016 he has been professor of Architectural Design at the Mendrisio Academy of Architecture (Switzerland). In 2008 he was honoured by the Royal Society for the Encouragement of Arts, Manufactures & Commerce of London, which gave him the title of “Royal Designer for Industry”.

Antonio Citterio is art director of Maxalto, Arclinea and Azucena.