Product identity

Product Codes

Chair

HR60	HR60L_B	HR60_B
HR60L

Warnings

Keep for reference: read carefully.

Always remember to be careful not to use the product improperly, considering its designated functions.

When the product is no longer used, do not abandon it, but take it to a suitable public waste collection facility.

The seat structure is made completely in solid wood. Any signs in the joint areas should be considered as intrinsic characteristics of wood as a "living" material. This phenomenon does not compromise the product structure seal in any way.

This product sheet complies with the legal obligations pursuant to the "Consumer Code" Decree n. 206 dated 6/9/2005 and the "Actuation Regulation" Decree n. 101 dated 8/2/1997.

Materials

Frame
solid wood

Seat frame
solid wood with elastic straps

Seat upholstery
flexible cold shaped polyurethane foam, polyester fibre

Back upholstery
polyester fibre

Ferrules and spacers
plastic material

Cover
fabric

Maintenance

Cover

For home washing of covers, follow the symbols on the technical sheet that came with the product.
Periodically adjust the Velcro fasteners to remove folds and creases due to normal use of the product.
If there are no Velcro fasteners, smooth the cover manually from the inside towards the outside.
For ordinary cleaning, dust with a soft dry cotton cloth.
If liquids should accidentally fall on the surface, remove them immediately and dry with paper towels.
The surface can then be cleaned with a white cotton or microfibre cloth, slightly damp with water and neutral soap, and then dried in a well-ventilated place.
In case of stains, act immediately to blot the stain with a clean white cloth and, if necessary, remove the dirt with a spoon or knife, using the flat part horizontally and being very careful to not ruin the cover.
Dab the stain from the outer edges inward to avoid rings.
All actions must be done with circular movements, without exerting excessive mechanical pressure.
Our Stores and dealers sell the specific 'Kit for leather maintenance and cleaning' by B&B Italia (code SETPN), which contains products suitable for the protection and cleaning of your leather product.

Wood - Painting

For weekly maintenance, dust the surface with a dry cloth.
For dried dirt, use a well-squeezed out cloth, damp with warm water.
For greasy or oily dirt, use a damp sponge and dish washing detergent, and then wipe with a well-squeezed out cloth damp with warm water.
Warning! Apply the detergent directly on the damp sponge, and never on directly on the furniture.
Do not exert excessive pressure and always follow the grain on wood furniture.
Note that if you press or rub too hard, surfaces can become 'polished'.
Avoid using abrasives and products containing solvents, ammonia and/or alcohol.
Make sure to dry the surfaces completely after washing.

End of life instructions

Remove the cover and, depending on the composition of the specific fabric, transfer it to the dedicated area.
Remove the back upholstery and send it to a dedicated consortium for polyester disposal.
Remove the upholstered seat cover and send it to a dedicated consortium for polyester disposal.
Remove the polyurethane upholstery and transfer it to a waste-to-energy plant or a PU recovery plant.
Cut the webbing and place it in the dedicated area for undifferentiated waste, the frame in the wood-only area and spacers in the plastic materials.
Take the structure to the area set aside for wood only, at the relevant public ecological dumpsite.
Put all the fixings together and take them to the area set aside for metals, at the relevant public ecological dumpsite.
Remove the ferrules from the frame and place them in the plastic materials recovery area.

Warranty

B&B Italia guarantees the cover, the feet, the materials, accessories and mechanisms making up the product for 26 months from the date of manufacture (as stated on the "Product data sheet - Guarantee") against any manufacturing defect including lacquering and frame of non-upholstery products. In any case, it has to be pointed out that the materials, even if adequately lightfast to sunlight and artificial light, may be subject to alterations over time due to prolonged exposure to light, washing and ordinary mechanical wear. The guarantee refers to original product manufacturing defects and consists of replacement or repair, free of charge, of the unusable or defective parts, ascertained and acknowledged as such by B&B Italia or its representative. The guarantee does not cover anomalies and spoilage due to:

normal wear over time;
illegitimate use;
inappropriate care with treatments not complying with the enclosed instructions.

Moreover, the guarantee does not cover defects of non-compliance that cannot be attributed to B&B Italia (e.g. incorrect assembling of the product and/or assembling not complying with the assembling instructions). This provision also applies to those products that are designed to be installed directly by the consumer, in the presence of correct and exhaustive instructions. The guarantee shall be forfeited if the products are unassembled, modified or repaired by anyone who is not authorised by B&B Italia. Any intervention made in guarantee does not interrupt the course thereof. To exercise the rights deriving from this guarantee, the relevant "Product data sheet - Guarantee" shall be forwarded to B&B Italia (to the address stated below) bearing the date of manufacture; said "Product data sheet - Guarantee" shall therefore be retained for the entire period during which the guarantee is valid. B&B Italia S.p.A. 22060 Novedrate (CO) Italy, Strada Provinciale 32 n.15 For the purpose of better preserving the product over time it is recommended:

not to jump or sit on the overhanging parts, the backrests and the armrests;
not to drag the product, lifting it instead, so as to avoid damages to the parts resting on the floor;
to protect the product against shocks and contact with pointed and sharp elements and liquids or detergents containing corrosive agents;
to follow the care instructions listed in the specific section of the material enclosed with the product.

Designer

Monica Armani

Born in Trento, Italy, daughter of an architect, Monica Armani’s own study in architecture evolved into a distinctly disciplined approach to her design process: Design in Molecules.

Years of international experience has systematically identified these molecules, and the success of every project lies in their disciplined application. Monica Armani designs collections of objects and accessories for Italian and international companies.

Her collections have become best sellers and references in the sector.