Gio
Antonio Citterio
Product Codes
Sofa
| GO203N | GO238N |
Central Element
| GO192CN | GO227CN |
Terminal Element
| GO197TDN | GO233TDN | GO233TSN |
| GO197TSN |
Corner Element
| GO197ADN | GO233ADN | GO233ASN |
| GO197ASN |
Cover Cloth
| GO192CF_N | GO197TSF_N | GO233ASF_N |
| GO197ADF_N | GO203F_N | GO233TDF_N |
| GO197ASF_N | GO227CF_N | GO233TSF_N |
| GO197TDF_N | GO233ADF_N | GO238F_N |
Warnings
- Keep for reference: read carefully.
- Always remember to be careful not to use the product improperly, considering its designated functions.
- When the product is no longer used, do not abandon it, but take it to a suitable public waste collection facility.
- Do not place the product in overly damp environments (e.g. saunas) and in direct contact with water (e.g. sea water, chlorinated water, snow).
- Do not immerse in tanks and swimming pools, and do not place at the water’s edge.
- Oil stains and suncare lotions must be immediately cleaned.
- If the products are placed outdoor and not used for a period of time, it is necessary to protect them with their specifically designed water-proof cover to prevent damage. Before covering, ensure that the product is sufficiently dry in order to prevent degradation/deterioration.
- Keep out of reach of children in order to prevent entanglement and suffocation.
- Do not cover the furnishing when someone is still sitting.
This product sheet complies with the legal obligations pursuant to the "Consumer Code" Decree n. 206 dated 6/9/2005 and the "Actuation Regulation" Decree n. 101 dated 8/2/1997.
Materials
Frame
solid wood
Webbing
polypropylene
Upholstery
shaped polyurethane of different density, combination of Solotex fibre and visco-elastic polyurethane, cover in water repellent polyester fibre
Ferrules
thermoplastic material
Waterproof cover cloth
PES fabric coated on one side in PU
Cover
fabric in limited categories
solid wood
Webbing
polypropylene
Upholstery
shaped polyurethane of different density, combination of Solotex fibre and visco-elastic polyurethane, cover in water repellent polyester fibre
Ferrules
thermoplastic material
Waterproof cover cloth
PES fabric coated on one side in PU
Cover
fabric in limited categories
Maintenance
Instructions
End of life instructions
Remove the cover and, depending on the composition of the specific fabric, transfer it to the dedicated area.
Remove the upholstered cover and transfer it to a consortium that handles PET disposal.
Remove the polyurethane upholstery and transfer it to a waste-to-energy plant or a PU recovery plant.
Remove the bars from the webbing and take them to the area reserved for metal.
Remove the bars from the webbing and take them to the area reserved for metal.
Take the structure to the area set aside for wood only, at the relevant public ecological dumpsite. Put all the fixings together and take them to the area set aside for metals, at the relevant public ecological dumpsite.
Forceably remove the ferrules from the structure, and dispose of them in the area set aside for plastics.
Warranty
B&B Italia guarantees the cover, the feet, the materials, accessories and mechanisms making up the product for 26 months from the date of manufacture (as stated on the "Product data sheet - Guarantee") against any manufacturing defect including lacquering and frame of non-upholstery products.
In any case, it has to be pointed out that the materials, even if adequately lightfast to sunlight and artificial light, may be subject to alterations over time due to prolonged exposure to light, washing and ordinary mechanical wear.
The guarantee refers to original product manufacturing defects and consists of replacement or repair, free of charge, of the unusable or defective parts, ascertained and acknowledged as such by B&B Italia or its representative.
The guarantee does not cover anomalies and spoilage due to:
Moreover, the guarantee does not cover defects of non-compliance that cannot be attributed to B&B Italia (e.g. incorrect assembling of the product and/or assembling not complying with the assembling instructions).
This provision also applies to those products that are designed to be installed directly by the consumer, in the presence of correct and exhaustive instructions.
The guarantee shall be forfeited if the products are unassembled, modified or repaired by anyone who is not authorised by B&B Italia.
Any intervention made in guarantee does not interrupt the course thereof.
To exercise the rights deriving from this guarantee, the relevant "Product data sheet - Guarantee" shall be forwarded to B&B Italia (to the address stated below) bearing the date of manufacture; said "Product data sheet - Guarantee" shall therefore be retained for the entire period during which the guarantee is valid.
B&B Italia S.p.A.
22060 Novedrate (CO) Italy, Strada Provinciale 32 n.15
For the purpose of better preserving the product over time it is recommended:
In any case, it has to be pointed out that the materials, even if adequately lightfast to sunlight and artificial light, may be subject to alterations over time due to prolonged exposure to light, washing and ordinary mechanical wear.
The guarantee refers to original product manufacturing defects and consists of replacement or repair, free of charge, of the unusable or defective parts, ascertained and acknowledged as such by B&B Italia or its representative.
The guarantee does not cover anomalies and spoilage due to:
- normal wear over time;
- illegitimate use;
- inappropriate care with treatments not complying with the enclosed instructions.
Moreover, the guarantee does not cover defects of non-compliance that cannot be attributed to B&B Italia (e.g. incorrect assembling of the product and/or assembling not complying with the assembling instructions).
This provision also applies to those products that are designed to be installed directly by the consumer, in the presence of correct and exhaustive instructions.
The guarantee shall be forfeited if the products are unassembled, modified or repaired by anyone who is not authorised by B&B Italia.
Any intervention made in guarantee does not interrupt the course thereof.
To exercise the rights deriving from this guarantee, the relevant "Product data sheet - Guarantee" shall be forwarded to B&B Italia (to the address stated below) bearing the date of manufacture; said "Product data sheet - Guarantee" shall therefore be retained for the entire period during which the guarantee is valid.
B&B Italia S.p.A.
22060 Novedrate (CO) Italy, Strada Provinciale 32 n.15
For the purpose of better preserving the product over time it is recommended:
- not to jump or sit on the overhanging parts, the backrests and the armrests;
- not to drag the product, lifting it instead, so as to avoid damages to the parts resting on the floor;
- to protect the product against shocks and contact with pointed and sharp elements and liquids or detergents containing corrosive agents;
- to follow the care instructions listed in the specific section of the material enclosed with the product.
Designer
Antonio Citterio
Antonio Citterio was born in Meda (Milano) in 1950, and started his design office in 1972, graduating in architecture at the Politecnico di Milano in 1975. Between 1987 and 1996 he worked in association with Terry Dwan and, together, they designed buildings in Europe and Japan.
In 2000, with Patricia Viel, he founded a practice for architecture and interior design, developing international complex long-term projects, at all scales and in synergy with a qualified network of specialist consultants. The studio has today taken the name of "Antonio Citterio Patricia Viel". Antonio Citterio currently works in the industrial design sector with numerous Italian and foreign companies. In 1987 and in 1994 he was awarded the Compasso d’Oro-ADI. From 2006 to 2016 he has been professor of Architectural Design at the Mendrisio Academy of Architecture (Switzerland). In 2008 he was honoured by the Royal Society for the Encouragement of Arts, Manufactures & Commerce of London, which gave him the title of “Royal Designer for Industry”.
Antonio Citterio is art director of Maxalto, Arclinea and Azucena.
In 2000, with Patricia Viel, he founded a practice for architecture and interior design, developing international complex long-term projects, at all scales and in synergy with a qualified network of specialist consultants. The studio has today taken the name of "Antonio Citterio Patricia Viel". Antonio Citterio currently works in the industrial design sector with numerous Italian and foreign companies. In 1987 and in 1994 he was awarded the Compasso d’Oro-ADI. From 2006 to 2016 he has been professor of Architectural Design at the Mendrisio Academy of Architecture (Switzerland). In 2008 he was honoured by the Royal Society for the Encouragement of Arts, Manufactures & Commerce of London, which gave him the title of “Royal Designer for Industry”.
Antonio Citterio is art director of Maxalto, Arclinea and Azucena.