Ginestra

Product Codes

Table

GN180TR

GN220T

GN280T

Cover Cloth

GN180TRF

GN220TF

GN280TF

Warnings

Keep for reference: read carefully.

Always remember to be careful not to use the product improperly, considering its designated functions.

When the product is no longer used, do not abandon it, but take it to a suitable public waste collection facility.

Do not place the product in overly damp environments (e.g. saunas) and in direct contact with water (e.g. sea water, chlorinated water, snow).

Do not immerse in tanks and swimming pools, and do not place at the water’s edge.

Oil stains and suncare lotions must be immediately cleaned.

Due to prolonged exposure to direct sun light the surface may become hot to touch. Special attention required.

The stoneware material is resistant to all types of weather and, being partially hygroscopic, it is necessary to ensure proper transpiration. Therefore, in order to prevent potential breakage, do not cover with sheets.

To maintain the quality and finish of the surface, it is advisable to use protective articles (e.g. placemats or trivets) under objects that could scratched it.

If the products are placed outdoor and not used for a period of time, it is necessary to protect them with their specifically designed water-proof cover to prevent damage. Before covering, ensure that the product is sufficiently dry in order to prevent degradation/deterioration.
Keep out of reach of children in order to prevent entanglement and suffocation.
Do not cover the furnishing when someone is still sitting.

This product sheet complies with the legal obligations pursuant to the "Consumer Code" Decree n. 206 dated 6/9/2005 and the "Actuation Regulation" Decree n. 101 dated 8/2/1997.

Materials

Frame and top
solid wood

Top section
porcelain stoneware

Ferrules
thermoplastic material

Waterproof cover cloth
PES fabric coated on one side in PU

Maintenance

Teakwood

Teakwood comes from various tectona plants that are common in tropical countries. As a result of its strong resistance to humidity and of its internal content of oily substances, it is considered a very precious wood type especially for outdoor environments. It must be said that wood is a living material that reacts to external agents; hence, it is normal and natural to note a variation in the shade of colour as time goes by. The change in colour over time is not a defect. On the contrary, it is a natural characteristic of this wood that lives and reacts to the outside environment with an aging/oxidation process which does not alter the structural integrity of the product.

For ordinary maintenance, we advise using a slightly abrasive sponge with neutral soap.
Avoid using products that contain solvents and/or alcohol.
To help maintain the original colour over time, waxes are available in stores. Always be sure to follow the directions that come with the product that you purchase.
However, it is always advisable to protect the product from extreme temperatures that can cause cracks to form in the wood.
Direct contact with rain can cause the release of the oily resin contained naturally in the wood, which generates pigmented halos on any surface that they come in contact with. In this case, it is advisable to remove the substance with a normal degreasing detergent.
Moreover, please note that, being in direct contact with the frame, particularly light-coloured cushions are more subject to rings forming.
Our Stores and dealers sell the specific 'Kit for teakwood maintenance and cleaning” by B&B Italia (code K_TKN), which contains products suitable for the protection and cleaning of your teakwood product.

Stoneware

For periodic cleaning, use a solution of warm water and neutral soap, rinse with plenty of water and dry carefully with a cloth or paper towels.
Never use steel wool.
Stoneware items do not absorb grease, liquids, and substances that leave indelible marks on other materials (e.g. coffee, lemon juice, coca cola).
These products are made of a ceramic mix fired at high temperature (1230 °C) using a single-firing technique, set up by preparing their own special composition of clays and selected minerals.
The high temperature single-firing technique causes the ceramic mix to combine with the enamel at very high temperature, and, as this vitrifies it makes the surface perfectly hygienic and resistant to both abrasion and attack by acid substances.
The enameled surface is therefore extremely hard and resistant to the weather and extreme temperatures.

Cover cloth

Elasticised technical textile, waterproof, developed to protect furniture from weather when not in use.
If condensation forms under the cloth, it will not damage product quality.
Wash the cloth according to the instructions printed on the underside of the cloth and let dry completely in the open air before storing in a closed place in order to prevent mould from forming.
When the product is no longer used, do not abandon it, but take it to a suitable public waste collection facility.
Always remember to be careful not to use the product improperly, considering its designated functions.

Instructions

Download PDF

Warranty

B&B Italia guarantees the cover, the feet, the materials, accessories and mechanisms making up the product for 26 months from the date of manufacture (as stated on the "Product data sheet - Guarantee") against any manufacturing defect including lacquering and frame of non-upholstery products. In any case, it has to be pointed out that the materials, even if adequately lightfast to sunlight and artificial light, may be subject to alterations over time due to prolonged exposure to light, washing and ordinary mechanical wear. The guarantee refers to original product manufacturing defects and consists of replacement or repair, free of charge, of the unusable or defective parts, ascertained and acknowledged as such by B&B Italia or its representative. The guarantee does not cover anomalies and spoilage due to:

normal wear over time;
illegitimate use;
inappropriate care with treatments not complying with the enclosed instructions.

Moreover, the guarantee does not cover defects of non-compliance that cannot be attributed to B&B Italia (e.g. incorrect assembling of the product and/or assembling not complying with the assembling instructions). This provision also applies to those products that are designed to be installed directly by the consumer, in the presence of correct and exhaustive instructions. The guarantee shall be forfeited if the products are unassembled, modified or repaired by anyone who is not authorised by B&B Italia. Any intervention made in guarantee does not interrupt the course thereof. To exercise the rights deriving from this guarantee, the relevant "Product data sheet - Guarantee" shall be forwarded to B&B Italia (to the address stated below) bearing the date of manufacture; said "Product data sheet - Guarantee" shall therefore be retained for the entire period during which the guarantee is valid. B&B Italia S.p.A. 22060 Novedrate (CO) Italy, Strada Provinciale 32 n.15 For the purpose of better preserving the product over time it is recommended:

not to jump or sit on the overhanging parts, the backrests and the armrests;
not to drag the product, lifting it instead, so as to avoid damages to the parts resting on the floor;
to protect the product against shocks and contact with pointed and sharp elements and liquids or detergents containing corrosive agents;
to follow the care instructions listed in the specific section of the material enclosed with the product.

Designer

Antonio Citterio

Antonio Citterio was born in Meda (Milano) in 1950, and started his design office in 1972, graduating in architecture at the Politecnico di Milano in 1975. Between 1987 and 1996 he worked in association with Terry Dwan and, together, they designed buildings in Europe and Japan.

In 2000, with Patricia Viel, he founded a practice for architecture and interior design, developing international complex long-term projects, at all scales and in synergy with a qualified network of specialist consultants. The studio has today taken the name of "Antonio Citterio Patricia Viel". Antonio Citterio currently works in the industrial design sector with numerous Italian and foreign companies. In 1987 and in 1994 he was awarded the Compasso d’Oro-ADI. From 2006 to 2016 he has been professor of Architectural Design at the Mendrisio Academy of Architecture (Switzerland). In 2008 he was honoured by the Royal Society for the Encouragement of Arts, Manufactures & Commerce of London, which gave him the title of “Royal Designer for Industry”.

Antonio Citterio is art director of Maxalto, Arclinea and Azucena.