Product identity

Product Codes

Armchair

CR75F

CR75R

Warnings

Keep for reference: read carefully.

Always remember to be careful not to use the product improperly, considering its designated functions.

When the product is no longer used, do not abandon it, but take it to a suitable public waste collection facility.

The seat structure is made completely in solid wood. Any signs in the joint areas should be considered as intrinsic characteristics of wood as a "living" material. This phenomenon does not compromise the product structure seal in any way.

This product sheet complies with the legal obligations pursuant to the "Consumer Code" Decree n. 206 dated 6/9/2005 and the "Actuation Regulation" Decree n. 101 dated 8/2/1997.

Materials

Frame
solid wood

Spacers
anodized aluminium

Ferrules
thermoplastic material

Cover
thick leather

Maintenance

Thick leather

We also recommend occasionally wiping surfaces with a cloth that has been soaked in warm water and well wrung out.
Any stains or liquids should be removed immediately using a moist, absorbent cloth and plain soap, if necessary.
Any stains or liquids should be removed immediately using a moist, absorbent cloth and plain soap, if necessary.
Never apply excessive pressure during cleaning.

Wood - Painting

For weekly maintenance, dust the surface with a dry cloth.
For dried dirt, use a well-squeezed out cloth, damp with warm water.
For greasy or oily dirt, use a damp sponge and dish washing detergent, and then wipe with a well-squeezed out cloth damp with warm water.
Warning! Apply the detergent directly on the damp sponge, and never on directly on the furniture.
Do not exert excessive pressure and always follow the grain on wood furniture.
Note that if you press or rub too hard, surfaces can become 'polished'.
Avoid using abrasives and products containing solvents, ammonia and/or alcohol.
Make sure to dry the surfaces completely after washing.

Aluminium

We advise using normal commercial products for cleaning delicate surfaces and/or warm water and neutral soap.
Never use abrasives or products containing solvents, ammonia and/or alcohol.
Make sure to dry the surfaces completely after washing.

End of life instructions

Remove the cover and take it to the non-recyclable waste area.
Remove the screws (steel), spacers and lower edges (aluminium) and take them to the area reserved for metal.
Take the frame to the area reserved for wood.
Remove the ferrules and take them to the area reserved for plastic materials.

Warranty

B&B Italia guarantees the cover, the feet, the materials, accessories and mechanisms making up the product for 26 months from the date of manufacture (as stated on the "Product data sheet - Guarantee") against any manufacturing defect including lacquering and frame of non-upholstery products. In any case, it has to be pointed out that the materials, even if adequately lightfast to sunlight and artificial light, may be subject to alterations over time due to prolonged exposure to light, washing and ordinary mechanical wear. The guarantee refers to original product manufacturing defects and consists of replacement or repair, free of charge, of the unusable or defective parts, ascertained and acknowledged as such by B&B Italia or its representative. The guarantee does not cover anomalies and spoilage due to:

normal wear over time;
illegitimate use;
inappropriate care with treatments not complying with the enclosed instructions.

Moreover, the guarantee does not cover defects of non-compliance that cannot be attributed to B&B Italia (e.g. incorrect assembling of the product and/or assembling not complying with the assembling instructions). This provision also applies to those products that are designed to be installed directly by the consumer, in the presence of correct and exhaustive instructions. The guarantee shall be forfeited if the products are unassembled, modified or repaired by anyone who is not authorised by B&B Italia. Any intervention made in guarantee does not interrupt the course thereof. To exercise the rights deriving from this guarantee, the relevant "Product data sheet - Guarantee" shall be forwarded to B&B Italia (to the address stated below) bearing the date of manufacture; said "Product data sheet - Guarantee" shall therefore be retained for the entire period during which the guarantee is valid. B&B Italia S.p.A. 22060 Novedrate (CO) Italy, Strada Provinciale 32 n.15 For the purpose of better preserving the product over time it is recommended:

not to jump or sit on the overhanging parts, the backrests and the armrests;
not to drag the product, lifting it instead, so as to avoid damages to the parts resting on the floor;
to protect the product against shocks and contact with pointed and sharp elements and liquids or detergents containing corrosive agents;
to follow the care instructions listed in the specific section of the material enclosed with the product.

Designer

Foster+Partners Industrial Design

The art, craft, and science of making has been at the root of Foster + Partners Industrial Design for decades.

Founded by Lord Foster, today the studio develops and delivers ideas-led products at every scale, from tables to turbines, in conjunction with manufacturers, craftspeople, and startups.

Working within an integrated design practice – collaboration is at the heart of Foster + Partners Industrial Design’s ethos– and every product is shaped by a wealth of experiences and global expertise. The studio is driven by principles of sustainability, combining rigorous research with a ‘design by making’ ethos. All projects are advanced through prototyping and making as an iterative approach – refining designs through trial and error, digital modelling, and physical craftsmanship.