Product identity

Product Codes

Table

TBU230	TBU280	TBU280M
TBU230M

Warnings

Keep for reference: read carefully.

Always remember to be careful not to use the product improperly, considering its designated functions.

When the product is no longer used, do not abandon it, but take it to a suitable public waste collection facility.

To maintain the quality and finish of the surface, it is advisable to use protective articles (e.g. placemats or trivets) under objects that could scratched it.

The technological difference between wood and other materials is that woods are rich in water. Wood is therefore a hygroscopic material that is subject to water exchange with the external environment, which can cause dimensional variations and shrinkage cracks on a macroscopic level, inside a certain interval of possible humidity levels. The phenomenon of shrinkage in solid wood is inevitable because direct exposure to sun and air causes the wood to dry out naturally. Shrinkage cracks are therefore to be considered a physiological phenomenon and not proof of low quality of the material or of the presence of defects.

This product sheet complies with the legal obligations pursuant to the "Consumer Code" Decree n. 206 dated 6/9/2005 and the "Actuation Regulation" Decree n. 101 dated 8/2/1997.

Materials

Top
solid wood, veneered wood particles panel or marble (matt polyester finish)

Frame
solid wood

Support crosspiece
steel

Feet
plastic material

Maintenance

Wood - Painting

For weekly maintenance, dust the surface with a dry cloth.
For dried dirt, use a well-squeezed out cloth, damp with warm water.
For greasy or oily dirt, use a damp sponge and dish washing detergent, and then wipe with a well-squeezed out cloth damp with warm water.
Warning! Apply the detergent directly on the damp sponge, and never on directly on the furniture.
Do not exert excessive pressure and always follow the grain on wood furniture.
Note that if you press or rub too hard, surfaces can become 'polished'.
Avoid using abrasives and products containing solvents, ammonia and/or alcohol.
Make sure to dry the surfaces completely after washing.

Marble (polyester)

For normal maintenance, we advise using a microfibre cloth damp with warm water.
In case of stains caused by liquids and/or greasy substances, blot/remove the stain immediately and then wipe the entire surface with a cloth damp with warm water.
Never use solvents or abrasive detergents, and always avoid contact with very hot objects (e.g. flatware, coffee pots, teapots).
To maintain the quality and finish of the surface over time, it is advisable to use protection on the surface (e.g. placemats or trivets) under objects that could scratch it.
Warning! Marbles with polyester can turn yellow if exposed to constant sunlight and/or high temperatures and humidity.

Steel

We advise using normal commercial products for cleaning delicate surfaces and/or warm water and neutral soap.
Never use abrasives or products containing solvents, ammonia and/or alcohol.
Make sure to dry the surfaces completely after washing.

Instructions

Download PDF

Warranty

B&B Italia guarantees the cover, the feet, the materials, accessories and mechanisms making up the product for 26 months from the date of manufacture (as stated on the "Product data sheet - Guarantee") against any manufacturing defect including lacquering and frame of non-upholstery products. In any case, it has to be pointed out that the materials, even if adequately lightfast to sunlight and artificial light, may be subject to alterations over time due to prolonged exposure to light, washing and ordinary mechanical wear. The guarantee refers to original product manufacturing defects and consists of replacement or repair, free of charge, of the unusable or defective parts, ascertained and acknowledged as such by B&B Italia or its representative. The guarantee does not cover anomalies and spoilage due to:

normal wear over time;
illegitimate use;
inappropriate care with treatments not complying with the enclosed instructions.

Moreover, the guarantee does not cover defects of non-compliance that cannot be attributed to B&B Italia (e.g. incorrect assembling of the product and/or assembling not complying with the assembling instructions). This provision also applies to those products that are designed to be installed directly by the consumer, in the presence of correct and exhaustive instructions. The guarantee shall be forfeited if the products are unassembled, modified or repaired by anyone who is not authorised by B&B Italia. Any intervention made in guarantee does not interrupt the course thereof. To exercise the rights deriving from this guarantee, the relevant "Product data sheet - Guarantee" shall be forwarded to B&B Italia (to the address stated below) bearing the date of manufacture; said "Product data sheet - Guarantee" shall therefore be retained for the entire period during which the guarantee is valid. B&B Italia S.p.A. 22060 Novedrate (CO) Italy, Strada Provinciale 32 n.15 For the purpose of better preserving the product over time it is recommended:

not to jump or sit on the overhanging parts, the backrests and the armrests;
not to drag the product, lifting it instead, so as to avoid damages to the parts resting on the floor;
to protect the product against shocks and contact with pointed and sharp elements and liquids or detergents containing corrosive agents;
to follow the care instructions listed in the specific section of the material enclosed with the product.

Designer

Naoto Fukasawa

Naoto Fukasawa is a designer known for his projects devoted to simplicity and sublime beauty, as well as unusual ideas. He has designed a wide range of products, from hi-tech to electronic equipment, architecture, and also high-end furniture and objects. He is collaborating with top leading brands, including B&B Italia, throughout Europe, America, and Asia. Fukasawa is one of the directors of 21_21 DESIGN SIGHT, he also sits on the design advisory board of MUJI and is the art director of MARUNI. In 2006, he established “Super Normal” with Jasper Morrison. In 2017, he became a member of the judging committee for the LOEWE Craft Prize. He is vice president at Tama Art University and director of The Nihon Mingei-kan (The Japan Folk Crafts Museum) since 2012. In 2022 he founded the Design Science Foundation. Fukasawa is the winner of numerous awards given by domestic and international institutions, including the 2018 Isamu Noguchi Award. He published a few books, the most recent one in 2018 “Naoto Fukasawa EMBODIMENT” (Phaidon).